Jump to content
murph

kohler mag 14 /spec 601559 running rough poss carb rebuild?

Recommended Posts

murph

starting hard,runs ok at low throttle but high when mowing starts backfiring,also when bumpy mowing.I did replace pump about 2 years ago,This would be my first carb rebuild if that is needed.Anyone know of a good kit with entry level instructions.KOHLER Magnum 14 /  model m148 / spec 601559 / sec 2228110723.Thanks, Gavin

Share this post


Link to post
Share on other sites
 
gwest_ca

Here is the Kohler service manual

Tried to determine what kit you need but didn't have any luck.

The online parts lists don't seem to have it either

https://www.partstree.com/parts/kohler-engines/engines-horizontal/m14-601559-kohler-m14-engine-magnum-wheel-horse-14hp-10-5kw-specs-601500-601557/

 

Garry

 

ADDING

The on-line list shows a replacement carb kit 47 853 29-S which is the complete carb. If you hover over the note it shows a carb number 47 053 96.

If you go to pages 3.10 and 3.11 in the carb manual they list the parts for that carb including a kit. Perhaps that is the one you need. I don't know if the original carb and the replacement are the same.

 

A Napa catalog shows the carb kit as 25 757 11-S which matches the info in the carb reference manual.

 

More options

https://www.rcpw.com/search/?quest=25+757+11

 

Garry

Share this post


Link to post
Share on other sites
 
murph

THANKS GARRY.I will order that kit from napa,any advice on carb set up? Screw adjustment .

Share this post


Link to post
Share on other sites
 
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...