seven 202 #1 Posted May 5, 2016 I have too build my own footrests as they are missing to. How wide should they be and about how long . and how far down from the top should the swivel part be welded on at? I picked up some metal for em today Share this post Link to post Share on other sites
953 nut 51,536 #2 Posted May 6, 2016 Hope this helps. 4 Share this post Link to post Share on other sites
Racinbob 10,264 #3 Posted May 6, 2016 Great drawing Richard but that's the 1960 footrest. The 61 had the cast footrest. 1 Share this post Link to post Share on other sites
953 nut 51,536 #4 Posted May 6, 2016 17 minutes ago, Racinbob said: The 61 had the cast footrest. I know that, but my presumption was that he isn't a mold maker with a forge! 7 Share this post Link to post Share on other sites
WHX?? 46,696 #6 Posted May 6, 2016 Richard got ya ther Bob.....less seven can cast 1 Share this post Link to post Share on other sites
Racinbob 10,264 #8 Posted May 6, 2016 Excellent point Share this post Link to post Share on other sites
AlwaysLookin80 1,308 #9 Posted May 6, 2016 16 hours ago, 953 nut said: I know that, but my presumption was that he isn't a mold maker with a forge! I was thinking the same exact thing, i didn't say anything because I didn't want to be the wise guy! lol 1 Share this post Link to post Share on other sites
Racinbob 10,264 #10 Posted May 6, 2016 (edited) Actually, I wasn't sure if Seven was aware of the difference. Some guys want to keep things as close to original as possible. If that's the case I'm sure he could find a pair of 61 rests. If I had a pair of 61's I'd put them on my 400. Edited May 6, 2016 by Racinbob Share this post Link to post Share on other sites
