69DEZ 4 #1 Posted December 11, 2008 Can anyone give me any information on how to run the cable for my blower. I can't find anything on it. Share this post Link to post Share on other sites
TT-(Moderator) 1,127 #2 Posted December 12, 2008 Dang..... that was tough to find the instructions for one of the older throwers! (the newer cable chute rotator models have what looks like a thread spool mounted on the rod to help speed up the turning process) Anyhow - your wish is granted : Share this post Link to post Share on other sites
69DEZ 4 #3 Posted December 12, 2008 Thank You Very Much!!!!! :banana: Share this post Link to post Share on other sites
WheelHorse_of_course 99 #4 Posted December 13, 2008 TT So do you have one for the newer style? Or even the whole manual. All my manuals show the skinny one like DEZ has. Thanks :hide: Share this post Link to post Share on other sites
TT-(Moderator) 1,127 #5 Posted December 13, 2008 This one? : (condensed and rearranged from the original manual - should cover 1975 to 1990 models) Share this post Link to post Share on other sites
WheelHorse_of_course 99 #6 Posted December 13, 2008 Thanks :banana: JUst what I needed. Share this post Link to post Share on other sites
mark89 0 #7 Posted February 10, 2010 grate info got my chute going grate thanks mark Share this post Link to post Share on other sites
scifi4all 6 #8 Posted February 11, 2010 I want to add an additional thanks to TT today, for posting the cable install sheets. I am starting to love new technology. I was having a problem with my chute cable and remembered this post. Instead of having to go inside and find my manual, I pulled this posting up on my Blackberry. My chute cable is down to bare wire and started to slip in the crank shaft and would not hold. Found an old piece of green clothesline cable and it worked perfectly as a temporary replacement. Share this post Link to post Share on other sites
TT-(Moderator) 1,127 #9 Posted December 16, 2010 Does anyone think this should be "pinned" to the top here in the I & A forum? (at least until snow season is over) Share this post Link to post Share on other sites
Kelly 1,028 #10 Posted December 16, 2010 sounds good to me, right next to the plow info. Share this post Link to post Share on other sites
Jim_M 178 #11 Posted December 16, 2010 sounds good to me, right next to the plow info. I'll second that. Great information to have available when you need it. Share this post Link to post Share on other sites
PPGman 5 #12 Posted December 16, 2010 I'll third vote that! I spent about 3 hrs one night trying to route a new cable. At the end of the process, i should have been thrown in a straight jacket for a few hrs just to get my bearings...(and learn my name again). It would have made me happier than a gopher in soft dirt to find this diagram last year :ychain: 1 Share this post Link to post Share on other sites
