montess85 4 #1 Posted September 30, 2015 I'm going to dig into the front end of my 552. It has a bit of slop in the steering and spindles. Does anyone make new tie rod ends for this thing? They all have a bit of play. Also are there bushings in the front spindles? Share this post Link to post Share on other sites
GlenPettit 1,714 #2 Posted September 30, 2015 Take a look at "WheelHorseMan1000" down under Venders:see file: Share this post Link to post Share on other sites
wallfish 15,770 #3 Posted September 30, 2015 The front axle can be reamed out to 7/8 and fitted with bronze bushings 3/4 ID x 7/8 OD for the spindlesA 7/8 construction reamer works well which just fits in your drill 1 Share this post Link to post Share on other sites
rmaynard 14,805 #4 Posted September 30, 2015 ^Yup, what he said works. Sent from my MotoG3 using Tapatalk Share this post Link to post Share on other sites