Jump to content
radweldgod

73400 toro wheelhorse no spark but turns over fine

By radweldgod, in Wheel Horse Electrical

Recommended Posts

radweldgod    0

radweldgod
Posted

parked my 73400 last week after mowing with no issues and this week i turned the key and it turns over fine but will not start checke dspark plug and no spark at all not even when i touck it to ground while trying to start help so many wires

 

Share this post

Link to post
Share on other sites
 

radweldgod    0

radweldgod
Posted

sorry kohler magnum 14 engine

Share this post

Link to post
Share on other sites
 

rmaynard    14,864

rmaynard
Posted

Make sure that the PTO is disengaged and that you have the proper amount of oil in the engine. According to the wiring diagram, that model has an oil level switch which will kill the magneto in the event of low oil.

Share this post

Link to post
Share on other sites
 

gwest_ca-(File Mod)    10,479

gwest_ca
Posted

Low oil switch maintenance

 

Garry

Share this post

Link to post
Share on other sites
 

radweldgod    0

radweldgod
Posted

checked the oil level it is good 


pto is also disengaged and the switch tests good

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • BrianKoch
      What am I doing wrong? ‘68 Charger 12
      By BrianKoch
      Hello gentleman, 
       
      Problem: will not crank on its own, will crank with jump box—but still not fire
       
      Recent things I did prior to this issue: cleaned fuel filter, replaced battery cables, replaced cable from ignition to starter
       
      I have my test light out and am probing around. 
       
      There is no power at ignition/magneto wire or the ignition/starter wire
       
      There is power everywhere else






    • Jeff-C175
      Tractor 1989 416-8 Wiring Detailed Rev'd.pdf
      By Jeff-C175
      Detailed wiring from the Demystification Guide #492-4509
      4 pages 1.4MB Color
      p7-67 to p7-70
       
      Onan powered
       
      1989 416-8 model 31-16O801
    • trident
      Electric PTO
      By trident
      Need some help. My 800 Special has an electric PTO. It is not working. Checked Ohms - nothing. My questions are 1) how does the PTO come off and 2) can they be rebuilt? I took the bolt out that I thought holds it on but no luck. Must be something more?
    • grasscuts
      1993 520h back firing
      By grasscuts
      Hi, here's what happened. I changed out 9 pin moles plug...had issues tracter quit running and changed the plugs while I was at it....got plugs from auto store cross reference to ngk they said it was the same heat range and I check electrod  length with calipers ,same...tracter started right up and ran great for about 10 min. And started back firing and quit.....going to check it out tonite anybody have an idea?    
    • jakester
      unknown electrical componant
      By jakester
      hello all I'm a new owner of a 312-8 tractor, have starting problems, came across a very small, what I believe is a relay between the battery and the dash,its about 2/3rd size of a cube of sugar silver on the outside blue on top with a hole bout the size of a pea, theres 6 pins with wires connected to it on the bottom do not know what this is any thoughts? I cannot determine the exact year of this machine for there is no tag anywhere only tag on engine kohler magnum md #m12s   ser# 170370459  spec#  471527  I figure its mid to late 80s to early 90s. of all the wiring diagrams ive looked at it does not show any thing like what I just described also can that little circuit board be removed that's like a test point for idiot lights? any help would be appreciated  jeff
×
×
  • Create New...