more plow differences - oh my

[dgjks6 6]

I read through all of the plow discussions - and looked at all the pictures, but I could not find an answer to this question.

So I got a 48 inch plow

79350 with a ser number in the 890000's

It came off of a 520 and I have a 312.

I am trading a member the extender bar for the 520 for the rear mounting brackets. The toro schematic looks like this:

https://lookup3.toro.com/partdex/index.cfm?...1&partsviewer=1

but the plow I bought looks like this:

http://www.wheelhorseforum.com/index.php?showtopic=1212

there are 2 beams - both welded on mine and in the pic that are not on the schematics. I can move the bar that attaches the lift bar so it will fit mine, but...

can he just put the extender on his and it will mount to a 520 - or are we going to have to trade frames also?

Also, will my blade adjustment handle be in the right place?

Just wondering

[Kelly 1,028]

If the plows are both in good shape why not just trade plows ? everyone gets what they need, just a thought.

[dgjks6 6]

that's what we were debating - but we are 5 hrs apart.

[dgjks6 6]

Never Mind - I figured it out. The extension for the 520 is 2 parts. The bracket on the end of the plow and the T shaped bar in the middle.