wesley 32 #1 Posted January 11, 2015 With regard to the main crank oil seals on the K241 engine,has anyone used after market seals with any luck?. wes Share this post Link to post Share on other sites
rmaynard 14,805 #2 Posted January 11, 2015 Wes, I have used the seals that come in the gasket package from Prime-Line, Stens, and BBT, and they are fine. Share this post Link to post Share on other sites
wesley 32 #3 Posted January 11, 2015 Wes, I have used the seals that come in the gasket package from Prime-Line, Stens, and BBT, and they are fine. many thanks for your reply , will se if my local seal people can do them , the firms that l have used in the past for kholer parts ,no longer deal with kholer engines or there parts,mybe another member thats in the uk like me can help. wes Share this post Link to post Share on other sites
meadowfield 2,545 #4 Posted January 11, 2015 Wes, I been recommended Mike Hitchins at http://www.guypartsandservice.co.uk by a few folks. Mark Share this post Link to post Share on other sites
Anglo Traction 759 #5 Posted January 12, 2015 Hi Wes, just seen this. I'm certain that the k241 Crank seals are the same size/part number as the K301/321. I have a spare pair of seals from my K301 rebuilds if you still need them?. Regards Share this post Link to post Share on other sites
wesley 32 #6 Posted January 14, 2015 Many thanks , have sent you a message. wes Share this post Link to post Share on other sites
wesley 32 #7 Posted January 16, 2015 With luck you my message will get to anglo traction this time. must be getting old wes Share this post Link to post Share on other sites