Wheel Horse 48" Mower Drive belt

[caddisman 3]

I have wheel horse side discharge mower deck and unsure what belt to use for the drive belt. The mower is on a 14hp 8 speed Automatic from the mid 70's. The belt look to be around 3/8 wide and 96 inches in length. I cant read the original numbers. Can anyone help?  Thanks, Anthony

[gwest_ca-(File Mod) 10,474]

The model 5-1210 deck uses a 102742 drive belt that is 1/2" x 103".

Spindle belt is 1594 which is 1/2" x 107.21"

 

Decks are sized by their width of cut - not the width of the deck.

 

Tell us more.

 

Garry

[caddisman 3]

Thanks Garry. My mower would be the 5-1010. Thanks for tip on the size of the mower. It would the 42 inch model. Do you know what the correct belt for the 42 inch deck.?

 

Thanks,

Anthony

[gwest_ca-(File Mod) 10,474]

The 5-1010 uses the same 102742 drive belt that is 1/2" x 103" as the 48" deck.

The spindle belt is 6738 which is 1/2" x 86".

 

Make sure you get a belt that is designed to bend backwards over a flat idler.

 

If you ever get stuck search the Manuals here using the word chart.

There are not that many to pick through to get the one you want. The belt dimensions are on the last pages of each belt file.

 

Garry

[caddisman 3]

Thank you Garry for your help. I have from now till spring to find the belt. Should have no problem with that.

 

Take care,

 

Anthony

[Josey Wales 1]

How about the blade numbers  And where can I get a set? 48" deck. Assuming that belt info is the same?

[gwest_ca-(File Mod) 10,474]

Do you know the model number and serial number of your deck? Here is a list of the decks. Belt numbers may be the same but I like to check against the model number to make sure.

 

Mower DNA

1966-1967 model RL-486 replaced by

1968 model 5-1481

1969 model 5-1482

1970 model 5-1483

1971 model 5-1200

1972 model 5-1201

1973 model 5-1202

1973-1974 model 5-1210

1975 model 5-1211

1976 model 65-48MS01

1976 model 65-48MS02

1977 model 75-48MS01 - These all used blades with 5/8" x 3/4" double-D center hole unless the spindles have been upgraded.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Note - 3/4" or .750" is 19.05mm

1977 model 75-48MS02 - Uses 6203 bearings with 3/4" ID - (First deck to use blades with 3/4" center hole)

1978 model 85-48MS01 - Uses 6203 bearings with 3/4" ID

1979 model 95-48MS00 - Uses 6203 bearings with 3/4" ID

1979 model 95-48MS01 - Uses 6203 bearings with 3/4" ID

1980 model 05-48MS01 - Uses 6203 bearings with 3/4" ID

1981-1983 model 05-48MS02 - Uses 6203 bearings with 3/4" ID

1984 model 05-48MS03 - Uses 6203 bearings with 3/4" ID

 

Note - 17mm is .669"

1985 model 05-48MS04 - Uses 6203 bearings with 17mm ID

1986-1988 model 05-48MS05 - Uses 6203 bearings with 17mm ID

1987-1988 model 05-48SC01 - Uses 6203 bearings with 17mm ID

1989 model 15-48SC01 - Uses 6203 bearings with 17mm ID

1990 model 15-48SC02 - Uses 6203 bearings with 17mm ID

1991-1992 model 15-48SC03 - Uses 6203 bearings with 17mm ID

1993-1997 model 78360 - Uses 6203 bearings with 17mm ID

1998-2007 and 2009-12 model 78361 - Uses 6203 bearings with 17mm ID - These all use blades with 3/4" center hole

 

Garry

[gwest_ca-(File Mod) 10,474]

Should have included - 

If you know the model number of your deck find the ipl (illustrated parts list) in our library. The file description page should have the belts listed and the blade part numbers on it. Saves you having to download anything to see them.

Here is an example.

Clicking on the picture will take you to the file description page where this info is posted.

Clicking on Download will take you directly to the file.

Garry