Anglo Traction 759 #26 Posted April 14, 2015 All good advice and may be worth Pinning this Thread somewhere. Just something to consider. You may already have what you need to torque the 3/8" Square Head Screws/Bolts in your Tool Boxes. I'm sure someone must do the same. If you have a Male Hex drive Socket of reasonable size you can use this set up- Works well for me, saves buying another Socket and it's a square (4 point) socket = less burring risk. Only drawback is retaining the final 3/8" drive socket on the Hex drive end as it's not magnetic. I just use a piece of clear plastic bag over the hex drive end a push the final socket on to hold it there. 1 Share this post Link to post Share on other sites
