310-8 lift arm

[Kpro 3]

When I bought my tractor there was not a bolt connecting the chain to the arm. When setting it up for a mower deck, which hole on the arm and which link do I put the bolt through?

 

Thank you

[gwest_ca-(File Mod) 10,495]

Hope this helps

 

Garry

[bmsgaffer 2,043]

Garry,

 

Which manual did you pull that from? I havent found it in mine (though I might not have looked hard enough). I would like to print the full size page for my garage...

 

Thanks!

[bitten 133]

Thats from the parts list. You might be able to get it from parts tree. 

[gwest_ca-(File Mod) 10,495]

That is from the Toro Master Parts Viewer.

https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro

After the page you want opens click on the printer icon at the top left corner of the page.

 

Used model number 21-10K801 and then open the manual lift linkage page.

 

Garry

[skrusins 128]

I have a 1990 312-8. I looked the lift manual because the will not lock in place without me pulling up on the rod.

The manual on this sight looks the same. My problem is the lift handle is solid their is no number 8 button plug.

Is there another type of arm that they use so I could take it apart. I did sprayed PB Blaster for a few days because

it was really bad. Just need a little spring action.

Hope someone can help. Thanks

[gwest_ca-(File Mod) 10,495]

I think that button plug just makes it look pretty. The #4 spring is likely broken. Pull #7 cap and #6 grip off and you should see it captured between #5 spiral pin and #3 spring retainer.

 

Garry

[skrusins 128]

Thanks Alot Garry. It work exactly as you described I never took one apart before that really helped.

 

Stan