Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoticons maximum are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ebinmaine
      I'm accustomed to using Non detergent oil in all older small engines.
      Thanks to @pfrederi I have the manual for the Tecumseh and it says to use detergent oil BUT it is printed in 1998... Over 30 years after DOM on my engine.
       
      What do you folks use??
       
       
    • By ebinmaine
      I've ordered this set
       
      https://www.redoyourhorse.com/tecumseh-4-pc-engine-decal-set/
       
      from our awesome vendor Terry @Vinylguy.
       
      I know where the balloon sticker goes and the oil sticker.
       
      Where does the large "Solid State" one belong??
       
      Thanks!!
       
    • By Team70R
      Looking to get rid of all my Tecumsehs! The HH60 ran before I pulled it, just needed carb adjustments. Electric start! The other 2 appear to be H60s but are both in rough shape. One has a broken flywheel fin, stripped out oil plug hole and a seized governer. Other one has a broken crank or rod. Pm for more details! Pick up only, at this time. 






    • By raymondvandervort
      HH60 cast block in very good shape, bead blasted and primed with zinc chromate primer, 
      with some valve parts, dimensions available. Part numbers for this block have 
      been:32176;32163;31789;32176;32176A;32176B;34761. Prepped for a project the customer abandoned.
      Also parts obtained for this project available:
      Gasket set 33235A
      Breather 28423
      condenser 30548B
      Screw 650697A
      Screw 650694A
      wiper 30549
      Breather tube 35350
      valve cap 30964
      valve cap pin 20810
      gasket 29673
      valve cap 27882
      oil seal 28460
      oil seal 27876B
      carb 631828
      valve spring 27881
      points 30547a
      governor spool 30588A
      breather filter 28424
      bearing 31793
      valve retainer 27883
      bushing 31461
      gasket set 33234A
      rod 31380C
      ring set 34854
      piston 31797B;345503;34531
    • By raymondvandervort
      HH60 cast block in very good shape, bead blasted and primed with zinc chromate primer, 
      with some valve parts, dimensions available. Part numbers for this block have 
      been:32176;32163;31789;32176;32176A;32176B;34761. Prepped for a project the customer abandoned.
      Also parts obtained for this project available:
      Gasket set 33235A
      Breather 28423
      condenser 30548B
      Screw 650697A
      Screw 650694A
      wiper 30549
      Breather tube 35350
      valve cap 30964
      valve cap pin 20810
      gasket 29673
      valve cap 27882
      oil seal 28460
      oil seal 27876B
      carb 631828
      valve spring 27881
      points 30547a
      governor spool 30588A
      breather filter 28424
      bearing 31793
      valve retainer 27883
      bushing 31461
      gasket set 33234A
      rod 31380C
      ring set 34854
      piston 31797B;345503;34531
×