Implement decals

[Vinylguy 4,666]

Bell

could you tell me the dimensions of the decal on the dozer blade?

First one i ve seen angled like that.

TT

was this used as a common attachment decal?

Thanks

[DMESS 24]

TD, that particular decal is considered the "implement" decal for 1962-1964. I imagine it found some use into 1965, but it is generally only found on '62-'64 implements. 1965 and later implements used the silver decal like the one found on the rear of the 1965+ tractors. At some point in '67-'68 a decal similar to the hood sides of a 6 speed tractor was used here and there on implements too. By the mid seventies the red/white outline, serif font decal became the standard until it was slowly replaced with the white, black, red version.

Decal usage on the implements is rather random in some instances and tends to not always follow a specific year to year pattern. hard to explain, but they did a lot of random stuff with implement decals from what I've seen over the years.

It would take forever to cite specific examples.

[linen beige 14]

TD, I measured the decal on my WT-241 tiller. It's 6 11/16 across the long edges, 7 1/4 total width, 1 5/16 high, with what looks to be a 30 degrees from vertical slant on the ends.