simplicity on wheel horse

[jake22si 5]

I have a 32" simplicity snow thrower for a tractor. There is almost no easy way to make it fit, right. C-100

[kj4kicks 151]

Define "easy" .....

Pictures would also be a big help. We know what the front of the Horse looks like, but I'm not sure what the blower mounts look like.

Thanks!

E.

[Sparky-(Admin) 19,542]

Probably a huge pain in the butt to get it to fit and line up properly. Used WH single stage snow-blower attachments can be had for anywhere in the $150-$300 range and would hook right up with no engineering .

Where ya located?

Mike.........

[bdanie7 0]

I'm not positive , but the motor on your horse might spin in the opposite direction of what the mtd blower requires. you check that out first before doing alot of fabricating to make a mount.

[jake22si 5]

Probably a huge pain in the butt to get it to fit and line up properly. Used WH single stage snow-blower attachments can be had for anywhere in the $150-$300 range and would hook right up with no engineering .

Where ya located?

Mike.........

I'm in the seacoast area of NewHampshire

[bluetuna08 0]

theres a WH snowblower in NH craigslist for 200 i think.

[WheelHorse_of_course 99]

:banghead: