Jump to content
Molon_Labe

It followed me home....

Recommended Posts

Molon_Labe

These little tractors are like Lay's Potato Chips, one isn't nearly enough. Found this one listed on CL and took it home today. The po listed it as an 18hp with a 38" deck??? Okay neither are correct, it's actually a K241 10hp with a 42" deck. The overall condition is pretty good but the engine smokes under load, no knocks or clicking so I might be lucky enough to get out of it with just a ring job, but in the end will do whatever it takes. Now this is not the original engine since it is a 1979 C-111 and was manufactured with an 11hp B&S and from the looks of the frame rails and the left side if the grille it had something much larger in it at one time. Still, I'm happy to have it and will enjoy fixing it up. Below are some pics of it along side my C-161.

 

 

post-13276-0-62745400-1404435598_thumb.j

post-13276-0-24141000-1404435616_thumb.j

post-13276-0-21032800-1404435636_thumb.j

  • Like 6

Share this post


Link to post
Share on other sites
 
AMC RULES

Yep, told ya...you'd get more.

Two great lookin'   :wh: 's  there...

and more are sure to follow.  :handgestures-thumbsup: 

Edited by AMC RULES
  • Like 1

Share this post


Link to post
Share on other sites
 
Molon_Labe

Yep, told ya...you'd get more.

Two great lookin'   :wh: 's  there...

and more are sure to follow.  :handgestures-thumbsup: 

 

You were right but I'm having a hard time getting the wife to see it that way :?

  • Like 1

Share this post


Link to post
Share on other sites
 
rexman72

soon there will be a little one coming along to make it three

Share this post


Link to post
Share on other sites
 
AMC RULES

You were right but I'm having a hard time getting the wife to see it that way :?

:handgestures-thumbsup: Never ask her permission...

just show her the way.  :teasing-poke:

Share this post


Link to post
Share on other sites
 
Sparky

The notch (in green ) is a factory notch for the Briggs air-cleaner. The other notch, if that's what it is (in yellow) looks like it was done by a previous owner.

Some new decals would really make that tractor "pop"! Maybe a set of C-101's :eusa-think:  .

 

post-2-0-51158600-1404437514_thumb.jpg

 

Mike..............

 

  • Like 1

Share this post


Link to post
Share on other sites
 
Tankman

The start of something BIG! Don't ask the Ms., as stated, "Show her the way!"

 

Very nice Horse! And, be sure to get in touch with the Vinyl Guy. Great decals for your Stallion!  :)

  • Like 1

Share this post


Link to post
Share on other sites
 
Wheel-N-It

Looks good. That was a fine purchase. Good luck with it.

Share this post


Link to post
Share on other sites
 
papaglide

Real nice tractor. Keep us updated!

Share this post


Link to post
Share on other sites
 
Molon_Labe

The notch (in green ) is a factory notch for the Briggs air-cleaner. The other notch, if that's what it is (in yellow) looks like it was done by a previous owner.

Some new decals would really make that tractor "pop"! Maybe a set of C-101's :eusa-think:  .

 

attachicon.gifC-111.jpg

 

Mike..............

Thanks for the clarification Mike. It just looked like something done "after the fact". That probably explains the marks on the frame forward of the Kohler as belonging to the Briggs. New decals are on the list. Gonna tear it down this winter and try to get everything back to 100%.

 

Major

Share this post


Link to post
Share on other sites
 
953 nut

:WRS:  The more :wh:  you get the less the wife will say about them. After the first half dozen she will just give you "the look"!  :ROTF:    :text-lol:

 

:text-welcomeconfetti: 

  • Like 3

Share this post


Link to post
Share on other sites
 
Molon_Labe

After tearing the engine down I found it came out of a 1976 B100 and so did the deck. Overhauled the engine and had to put a throttle shaft bushing in the Walbro carb (really sloppy) to get it to run smooth but it was worth all of the effort. This little guy is a beast. Really pleased with the outcome on this one. If I end up getting another one I'll have to build another barn to put it in, but I'm looking.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...