Jump to content
Fun Engineer

02, New, Black with Black pleats seat cover, one left. Price reduced.

Recommended Posts

Fun Engineer

This is a NEW, Black with black pleats seat cover at a reduced price.

This is the last all black one piece seat cover that I have. So if you’ve been interested in finishing off that restoration project you worked so hard on, now is the time to buy that seat. Order and pay for it today and I’ll deliver to the show for free (no shipping charge).

Here is a picture of a black and white cover mounted and a couple of the all black cover draped over a seat (not installed). The all black is the same style as the black and white.

IMG_0503_zpsa0a9cb66.jpgblackseat2.jpgIMGP5108_zps4c49725b.jpgIMGP5109_zpseae3f6ee.jpg

 

These faithfully reproduced seat covers were made using high quality marine grade vinyl designed for years of dependable service.  An original seat cover from my Lawn Ranger L-157 was used as a pattern to assure accuracy and fit.  Materials were chosen that most closely match the original vinyl material used in the 60’s for color, style and texture. In order to save costs on shipping, foam and 1/8-3/16†cord is not included but is available at stores like Joann Fabrics or Michaels.  I have also used three layers of ½ inch carpet pad purchased at Lowes.  One or one and a half inch works well, depending upon its firmness.  Cut the foam to fit the different angles of the seat bottom and back. I use 3M Upholstery adhesive and glue the foam to the metal pan. Using adhesive is only an option and not required. Do not use adhesive on the vinyl as it can bleed through.

I accept checks (with the appropriate waiting period), cash or PAYPAL at burleyfarm@yahoo.com

 

 

Reduced Price for this one piece, all black seat cover.

 

 Price:    $50 shipped east of the Mississippi in the continental US.

                $51 shipped west of the Mississippi in the continental US. OR,

$45 prepaid and delivered to the 2014 Wheel Horse Collectors Show in Pennsylvania, June 19-21, 2014.

Remember, this is the last one piece black with black pleats seat that I will produce.

 

 

Edited by Fun Engineer
  • Like 1

Share this post


Link to post
Share on other sites
 
Fun Engineer

Sold the last of these today. Thanks for your support.

Dave

Sent from my tractor seat using Tapatalk 2

Share this post


Link to post
Share on other sites
 

  • Similar Content

    • rustyedge1
      By rustyedge1
      Looking at this Ferris seat and wondering about the issues I may encounter in trying to switch out entire seat on the 417 or even if it can be done ?
      Any info would be appreciated and thanks in advance.



    • wh315-8
      By wh315-8
      Picked up a 1972 Commando 800 w/36” rear discharge. From the grandson of the original owner. Hasn’t run in decades but have no doubt that with some cleaning up of carb, fuel system and check the head, it will run like a Horse.
      Has anyone ever seen the steering cap logo like this? 




    • Monstrosity
      By Monstrosity
      Show off what your doing from the seat of your Horse!!! Fixed up a mowing deck for the 1277 and put the plow on the C1014. Getting ready to level a topsoil pile and going down the block to mow the small park to test the mowing deck out.
    • Bach-Ed
      By Bach-Ed
      I need a little part number help.   I'm looking for the part number of the idler pulley that tensions the drive belt on my 857.  The diagram shows the left side of the tractor.  And I can't seem to locate the pulley on the parts drawing.  The bearings have gone out on my tractor's idler.
×
×
  • Create New...