A little something I picked up

[Kelly 1,028]

I bought out a complete collection a few weeks ago, and this project was in the deal, lots of little details in this unit, wiring is very nicely done, engine was set back a few inches, and mounted on a plate with rubber mounts,  custom batt tray was made and a very neat hold down built, super simple, but very effective, muffler support doubles as a motor plate stud, some very nicely built custom drop spindles, mounted on a forward swept 520 axle and custom tie rods, I think 90% of the bolts on this tractor are stainless, custom touches all over it, it has a 11hp briggs in it, that runs great, a sunstrand trans, with hyd lift, This machine is very quick, not sure why? pretty fun to drive, I thought about keeping it, but I have too many  of my own unfinished projects, so it will be going up for sale, I posted it here but had no interest at all, so I guess ebay it will go, I just wanted to share this nice machine, I'm hoping a person gets it that will appreciate all the work that has been put in to it, I only hit the high lights, and to see the workmanship in person is as good as it gets, pride in your work right here, just needs a new owner to finish it, mostly paint work, and I take zero credit for any of it.  

 

Enjoy the pics. 

 

 

 

[Wheel-N-It 2,967]

Thats a nice one Kelly. Someone will have alot of fun giving it the finishing touches.

[oneroadkingman 53]

thats a nice looking tractor wish i had some xtra cash laying around . glws.

[Racinbob 10,276]

That's pretty cool! Am I right in thinking the engine pulley is oversized? Ya know, the extra speed?

[Kelly 1,028]

yes the pulley is a little over size but not much, if it was a stick shift I would say that is it, but it's a hydro, not sure if spinning the pump faster will make it move faster?? but it is pretty quick, not a race car but gets you there faster than normal.