HokieAg07 129 #1 Posted March 3, 2014 Saturday was a 70 degree day here in Richmond, figured it was time to stretch the 416's legs. It has been a extremely wet winter, and my driveway has taken a beating so I put the grader blade to use. Hard to believe we will have couple inches of snow on the ground tomorrow! 5 Share this post Link to post Share on other sites
Desko 552 #2 Posted March 3, 2014 Nice tractor. What's with the smaller tires on the front? Share this post Link to post Share on other sites
dennist 139 #3 Posted March 3, 2014 Glad you got to enjoy the great weather...and to use the grader blade just adds to the enjoyment. Share this post Link to post Share on other sites
Kelly 1,028 #4 Posted March 3, 2014 We still have 2 feet of snow on the ground, forgot what grass looks like. Lots of the 300 and 400 series tractors use the 6" front wheels, they clear the 37" decks when turning Share this post Link to post Share on other sites
Wheel-N-It 2,967 #5 Posted March 3, 2014 Yes, we had a nice taste of Spring weather here too this weekend. It worked wonders for my attitude. Your driveway looks great. I really like your Wheel Horse too. Great pic! Share this post Link to post Share on other sites
Wishin4a416 2,185 #6 Posted March 3, 2014 Looks great. By the looks of the radar, you are getting snow now. Share this post Link to post Share on other sites
Wheel-N-It 2,967 #7 Posted March 3, 2014 OK, I just watched todays weather forcast. Not good. I woke up to 55 degree temps, but tonights low is predected to be 16. Also sleet is in the forcast for this afterrnoon. My attitude just did a 180 degree turn back to "Winter Mode". Share this post Link to post Share on other sites
can whlvr 991 #8 Posted March 4, 2014 we are closer to -55 than 55 above this week,again,today was a high of -16 celcius today,its gotta end soon Share this post Link to post Share on other sites
darg 7 #9 Posted March 5, 2014 nice looking 416 . How do you like the grader blade over the snow blade? I have a gravel drive way and use a snow blade, but it is a little hard to get it smooth. Share this post Link to post Share on other sites
