Jump to content
bowtiebutler956

A Gift From A Dear Friend

Recommended Posts

posifour11

Gorgeous!!

  • Like 1

Share this post


Link to post
Share on other sites
 
Jake Kuhn

That is one beautiful tractor matt! Great job on the resto! :handgestures-thumbup:

  • Like 1

Share this post


Link to post
Share on other sites
 
dclarke

Beautiful job, Matt!  :bow-blue:  What a nice tribute to your friend, that says a lot about both of you. :eusa-clap:

  • Like 1

Share this post


Link to post
Share on other sites
 
roscoemi

Outstanding!!  :bow-blue:  :handgestures-thumbupright:

  • Like 1

Share this post


Link to post
Share on other sites
 
Vinylguy

 I have to give a special thanks to Terry (vinylguy) for the custom engine decals he sent me. They're absolutely beautiful!!!! Thanks Terry!!

 

Matt :flags-texas:

You are very welcome Matt

What a great project and a beautiful restoration of Gary's Case.

  • Like 1

Share this post


Link to post
Share on other sites
 
bowtiebutler956

 Once again, thanks for all the kind, and encouraging words.  :thanks:

 I got to do some mowing with it today, and it does a beautiful job! You'll notice Danny riding around on his 52 Bantam as well. His philosophy is, if dads getting some seat time, he should too. He's a real chip off the ol block. :ychain:  :thumbs: 

 Here is the video.

 

 http://www.youtube.com/watch?v=4ugiiupAIk0&feature=youtu.be

 

Matt :flags-texas:

Share this post


Link to post
Share on other sites
 
Martin

cool video Matt!

hey, wheres all the snow?

you people with all the nice weather and green grass...... :angry-cussingblack:

  • Like 1

Share this post


Link to post
Share on other sites
 
bowtiebutler956

cool video Matt!

hey, wheres all the snow?

you people with all the nice weather and green grass...... :angry-cussingblack:

 Oh yeah, it was gorgeous today Martin. 70 degrees, clear blue skies. Shoot, I even managed to work up a sweat cleaning the carport.  :ychain:  :ROTF:  :ROTF:  :ROTF:  While our winter is much nicer, you wouldn't like our Summers. :banghead:

 

Matt :flags-texas:

Share this post


Link to post
Share on other sites
 
Martin

oh, yes i would. i used to live in a place with ''normal'' summers.......

summers that lasted longer than 3 months as well.....

take it any day over this aching cold weather.....

don't miss the droughts though....

Edited by Martin

Share this post


Link to post
Share on other sites
 
bowtiebutler956

oh, yes i would. i used to live in a place with ''normal'' summers.......

summers that lasted longer than 3 months as well.....

take it any day over this aching cold weather.....

don't miss the droughts though....

 

oh, yes i would. i used to live in a place with ''normal'' summers.......

summers that lasted longer than 3 months as well.....

take it any day over this aching cold weather.....

don't miss the droughts though....

 Martin, I completely forgot that your an Aussie.  :ROTF:  I here ya, as I can't stand the cold! I'll take 104 over 30 any day!

 

Matt :flags-texas:

Share this post


Link to post
Share on other sites
 
JERSEYHAWG /  Glenn

Matt, I just finished reading your story, very touching. Imho your lost friend Gary would be so proud of that job you did on that tractor, his gift to you. 

A superb restoration in every respect. thank you for sharing.

 

Glenn

Share this post


Link to post
Share on other sites
 
eb in oregon

 Oh, by the way, I did end up removing the inner seal on the bearings, as I prefer greasing them myself. 

 

This is just an opinion, but with the outer seals of the bearings in place in place, once you grease the bearings, your pretty much done for life. Grease is not like water or any other lighter liquid. It does not evaporate, or "just get used up". It must be displaced (moved) for it to go away. Hence sealed bearings. Lubed for life. As long as any lubricant stays "clean," it will do it's job. When engine oil is changed it isn't because it doesn't lubricate anymore, it's because it has impurities in it. Remove the impurities and you have recycled oil. In a sealed bearing, the only debrise that can cause a problem is a piece of bearing, or bearing race, that has detached and is causing problems.

 

Further greasing only forces grease into, and through (if there is some avenue of escape) the bearings in your application, but that won't change the situation.

 

One thing I've learned in life is that sometimes the obvious escapes us because of preconceived ideas, or our own thoughs blind us to the obvious.

 

My two cents.

Edited by eb in oregon

Share this post


Link to post
Share on other sites
 
Olratlr

Sorry for the loss of your friend and Good Luck with your tractor.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...