Jump to content
WHPuller

8 Pinion in a 10 Pinion housing

Recommended Posts

WHPuller

I have a 10 pinion rear end that is blown (wipped out the pinions) I was wondering if you could swap the 8 pinion carrier and axles into a 10 pinion housing?

 

The 10 pinion is 1 1/8" axle and I found an 8 pinion carrier, no axles on ebay for a reasonable price. Will the axles from the 10 pinion work with that carrier? The ad says they were 1 1/8" axles but were sold separate.

Share this post


Link to post
Share on other sites
 
jeremi3210

The 8 pinion axles are both the same size the 10 pinion axles are different one is longer than the other. You can put a 8 pinion in where a 10 pinion was but you have to clearance the bull gear some. Theres a post on here that tells you what to do.

Share this post


Link to post
Share on other sites
 
stevasaurus

I believe there is a "Service Bulletin" that deals with exactly what you want to do.  It should be in the Manuals Section under "Service Bulletins".

Share this post


Link to post
Share on other sites
 
gwest_ca

Service bulletin

 

Garry

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...