seth0804 5 #1 Posted June 6, 2013 Hello everyone I want to put an old wheel horse lift slot hitch on my C-81 8 speed tractor? what is is the best way to fabricate the cable to the hitch and what attaches the cable to the rock shaft on the lift arm?? any ideas will be helpful I do not have the small clevis for the hitch either.. Thanks Share this post Link to post Share on other sites
Trouty56 565 #2 Posted June 7, 2013 Are you looking for the cable specifications???? Length, connectors...etc?? Share this post Link to post Share on other sites
seth0804 5 #3 Posted June 7, 2013 yes any info would be great and also looking for the brinly adapter hh180?? Looks like it would work with the wheel horse slot hitch?? Thanks Share this post Link to post Share on other sites
SousaKerry 500 #4 Posted June 7, 2013 Your best bet would be to download the manuals for these attachments and see what parts you need. Then watch Epay or place a classified here for the components that you need. Bit my guess is you will need the rock shaft under the seat and a cable at a minimum. There have been other posts in the past about building your own clevis and slot hitches. Share this post Link to post Share on other sites
Trouty56 565 #5 Posted June 7, 2013 (edited) There is a slot to clevis adapter on jdogs website http://www.jdogshorseranch.com/storefront/ Edited June 7, 2013 by Trouty56 Share this post Link to post Share on other sites