Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoticons maximum are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Jparkes43
      Hello on my kawasaki 227-5 17 hp single cylinder i was thinking about putting a straight through pipe on it and people time and time again were mentioning burnt or warped exhaust valves and i have no idea how bad this is or how common it is so i just want to know if i should or shouldn't straight pipe the engine 
       
      thank you 
       
      James 



       
       
      see my other thread about tachometer gauges 
    • By Eric857
      Hi RedSquare,
       
      I am in the process of restoring a wheel horse 857 and i have just received decals to put on the machine but in not to sure how to put them on and protect them from getting scraped off. any suggestions?
       
       
      Thanks  
    • By zanepetty
      Hey everyone. As you know I'm hot and heavy into wheel horses now and many of you have answered many of my questions and helped me TREMENDOUSLY. But I've finally decided to give my horse a paint job and I thought I'd post pictures along the way. Here's the engine cleaned,sanded, prepped and primed. This is the first thing I've done. :)






    • By zanepetty
      I'm thinking of mounting farmall cub headlights (the thin looking ones) to my 753. I know they're not original wheel horse obviously and I'm usually a stickler with that type of deal but I think they would look good. Is this a bad idea in you're guys' opinion?
    • By zanepetty
      Hey again guys. My 753 tractor has an hour meter installed on it. (Very neatly done.) It says it now has 1739 hours on it. I would say it might have a little more than that if its not original which I'm guessing its not? The meter does appear old though. How long can a trans last in a 753. (Approximately) I know you can't tell me exactly but it doesn't jump out of gear going up or down hill. Just wondering. Thanks guys, I appreciate it,
      Zane
×