Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoticons maximum are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By lak1965
      Like many others on this site I decided Sunday it was time to install the New / Used Cab I bought in spring with the help of my brother. I never had it installed so was not sure what I was in for but it was assembled when I received it. First Picture was install rear frame under seat. It was at this point I went to RedSquare and downloaded the manual and printed it out for reference.

      Next install front of frame. Had to remove some brackets that mounted to the dash and drill a hole one each side of foot boards to mount the inside brace. That is a forward swept axle and tires you see sitting in the shed. Next spring project to mount that on the old C-160. Also I will change the way the lights are mounted on the hardtop.
       

      And finally the finished product. I was surprised at how well it fit and how easy it was to install. Let it Snow, Let it snow , Let it snow!

    • By cabin4me
      I have a 79 C-111 that I pulled a running 11hp briggs and stratton engine from and also a front push blade.  I am looking to sale both.  Push blade 200 Engine 100
      I also have the original mowing deck for this mower.  I am looking for a WH pull behind tiller attachment, maybe trade?
    • By Keith
      What other models can I use the upper steering shaft for my C-120?   
       
      Are there aftermarket steering wheels for this tractor?
    • By Keith
      C-120 upper steering shaft wanted
       
      I believe this is 
      # 104887 or 92-4987 
    • By Fun Engineer
      Has anyone been successful mating a D series mid grader blade to a c-series?
×