Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoticons maximum are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Joemckna82
      Hi all,
       
      Looking for an engine for a 1976 A-100.  It's a Briggs # 251707 0161-01 76061512 (I was able to pull parts on Briggs up by using # 251707 0161-99).
       
      And or a running parts tractor. Complete tractor (and or motor alone) must be in good running condition with no charging or fuel related issues. 
       
      I'm a cash buyer, no BS. 
       
      Thank you!
       
       
    • By Npostusa
      Hi Just bought my 312 this spring when we moved into a new home with two acres of land.  Love the wheel horse, but I am not even sure if I have to change a oil filter and for that matter where the filter or oil plug would be - any guidance would be appreciated.  Put a little marvel mystery oil in the gas, and just started it up for a few, but want to change the oil for the spring. Any guidance on where to start would be greatly appreciated. 

    • By lak1965
      Like many others on this site I decided Sunday it was time to install the New / Used Cab I bought in spring with the help of my brother. I never had it installed so was not sure what I was in for but it was assembled when I received it. First Picture was install rear frame under seat. It was at this point I went to RedSquare and downloaded the manual and printed it out for reference.

      Next install front of frame. Had to remove some brackets that mounted to the dash and drill a hole one each side of foot boards to mount the inside brace. That is a forward swept axle and tires you see sitting in the shed. Next spring project to mount that on the old C-160. Also I will change the way the lights are mounted on the hardtop.
       

      And finally the finished product. I was surprised at how well it fit and how easy it was to install. Let it Snow, Let it snow , Let it snow!

    • By cabin4me
      I have a 79 C-111 that I pulled a running 11hp briggs and stratton engine from and also a front push blade.  I am looking to sale both.  Push blade 200 Engine 100
      I also have the original mowing deck for this mower.  I am looking for a WH pull behind tiller attachment, maybe trade?
    • By Keith
      What other models can I use the upper steering shaft for my C-120?   
       
      Are there aftermarket steering wheels for this tractor?
×