Question about PTO pulley on C-121

[EZRYDER 1]

Is the PTO pulley supposed to spin even when the PTO clutch is not engaged? Mine does, is there an adjustment necessary?

Larry

[mrocket49 23]

Mine spin if there are no belts attached to the pulleys but if a belt is on like for a mower deck or snow blower, it doesn't. I suppose I could adjust the pto brake alittle better and it might not spin.

[Sparky-(Admin) 19,541]

Mine all spin when disengaged and there are no attachments on the machine such as a deck. I would take off the PTO, make sure its greased correctly (not to much!) and put it back together and not worry about it.

Mike..............

[rmaynard 14,894]

The PTO should have a brake on it. If it is not properly adjusted, or the PTO is not fully disengaging, it will continue to spin. Take a look at the PTO brake adjustment procedure in your owners manual. It's on page 24. If you don't have a manual, one can be downloaded from the manuals section.

Even thought the title says B-Series, it covers the C-121