xring1 2 #1 Posted October 29, 2012 I had not started the tractor since the middle of the summer. Today I went to start it and evidently there is no power when the switch is turned on. The amp gauge does not move. I checked and there is power across the starter solinoid and engine will turn over with screwdriver across posts but of course no spark. Fuses are ok, or I should say the 2 smaller fuses are ok...I was looking at the wireing diagram for my 520 and it shows another 30A fuse...is there another fuse in the 417A? I checked out the switch and it appears ok. Seat and pto safeties are bypassed.. Anyone got a clue??? Gonna snow soon and need to get the ol girl running Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,492 #2 Posted October 29, 2012 1986 diagram shows a 25 amp fuse feeding the ignition switch and from there a 15 amp fuse feeding the gauges, circuit board and lights. Don't have a 1985 diagram. Garry Share this post Link to post Share on other sites
xring1 2 #3 Posted October 29, 2012 I got it..... It was the neutral switch Share this post Link to post Share on other sites
JimmyJam 516 #4 Posted November 4, 2012 How did you find out it was the neutral switch? Secondly, how do you bypass seat switch? I maybe having the same problem. Share this post Link to post Share on other sites
