redfox1 0 #1 Posted April 1, 2012 Ok red square pullers,i've come to the point of mounting my 20hp command on the 414-8 frame,and i'm scratchin' my head on this one. What works best for getting everything to line up properly(sideways,front to back and height)? Thank you in advance for your upcoming wisdom Ron Share this post Link to post Share on other sites
smoreau 658 #2 Posted April 1, 2012 I used a 520 plate and both drivers side bolts lined up perfect, I did have to drill 2 holes through the frame and plate for the pass. side. Share this post Link to post Share on other sites
chris11 184 #3 Posted April 1, 2012 This is what i made to mount engine . 250 Aluminum plate. 1 Share this post Link to post Share on other sites
chris11 184 #4 Posted April 1, 2012 Heres it with. comand block. 1 Share this post Link to post Share on other sites
redfox1 0 #5 Posted April 1, 2012 Thank you very much guys. I think I can start buildin' and quit scratchin' . Any others with pics would be welcome too. I learn much from pics(just the way I am). Thanks again. Ron Share this post Link to post Share on other sites
AMC RULES 36,945 #6 Posted April 2, 2012 :text-yeahthat: :text-goodpost: Share this post Link to post Share on other sites
chris11 184 #7 Posted April 2, 2012 Make sure you dont go to far to the left side .Because of your clutch pedal will hit fan cover. Share this post Link to post Share on other sites
Deere Hunter 54 #8 Posted April 2, 2012 Mine is mounted similar to Chris's, except I used 1/4" steel. This is the only pic I could find right now on my computer... Share this post Link to post Share on other sites
bowtiebutler956 649 #9 Posted April 2, 2012 Awesome pics everyone. Matt :flags-texas: Share this post Link to post Share on other sites
redfox1 0 #10 Posted April 3, 2012 I agree with Matt, these are awesome visual references. With what Chris said and Waynes pic, I'm gettin some good creative juices flowin'. This stuff is so good to know ahead of time. It also keeps the headaches to a minimum . This Red Square team is a well oiled mow-sheen.(couldn't help that one). If there are more pics, keep'em comin'. Thanks again crew!! Ron Share this post Link to post Share on other sites
redfox1 0 #11 Posted April 24, 2012 Chris11, what are the dimensions of your mounting plate? Thank you. Ron Share this post Link to post Share on other sites
chris11 184 #12 Posted April 26, 2012 Ill make a drawing, let me get back to you. Share this post Link to post Share on other sites
