hitches and wheelie bars

[buckeye25 0]

Hey folks i have traditionaly pulled cubs but have a c120 hydro that i am doing a rear end swap in . my oldest daughter just graduated from the kiddie pedal pullers and is now ready for some horse power wheel horse power that is not sure how to set up a hitch and wheelie bar system. any pics or info would be great thanks

[Flatheadpuller 6]

This is the rear of mine.

[TT-(Moderator) 1,127]

I built this one a few years ago:

[Deere Hunter 54]

Here's the setup on my 300 series.

[jdpuller 2]

Here is our hitch is has since been modified to fit on a 8 speed.

[buckeye25 0]

thanks for the pics guys this helps quite a bit im sure ill have more questions the further in i get :)

[Jon Steffen 1]

These photos are basicly what my wheelbars and hitch is going to look like when i am done but i am not useing skid pads but wheels insteed

[buckeye25 0]

thanks jon and welcome to red square i agree with the wheels the skid plates create to much drag when you get up on them but the wheels will keep turning and as we all know it just may very well be that one inch that makes or breakes the season ill put my points on the wheels any day the pics are very helpfull :)

[chris11 184]

This is a .250 steel plate with everthing bolted on to it. also if you look at the hitch you can see the ajustment knob at the top. wheely bars ajust too.

[Jon Steffen 1]

These photos are basicly what my wheelbars and hitch is going to look like when i am done but i am not useing skid pads but wheels insteed

u can run these if the groupu want to run with allows them in the rules