fourwheels0 191 #1 Posted January 19, 2012 anybody have the size and number for the drive belt on a 1975 c-160 8 speed. i can't seem to find it here on the site. Share this post Link to post Share on other sites
can whlvr 991 #2 Posted January 20, 2012 7473 toro #,not sure of final length,i always buy oem drive belts so i dont need to measure them Share this post Link to post Share on other sites
rmaynard 14,893 #4 Posted January 20, 2012 The belt size according to Wheel Horse is 5/8" x 81.95". Share this post Link to post Share on other sites
fourwheels0 191 #5 Posted January 20, 2012 thanks for the size. Share this post Link to post Share on other sites
fourwheels0 191 #6 Posted January 23, 2012 where can i get this belt #7473 from?. both my local dealers don't stock it. Share this post Link to post Share on other sites
rmaynard 14,893 #7 Posted January 23, 2012 Try http://www.jackssmallengines.com or you can always go to Tractor Supply and pick up an after-market one. My blue Kevlar belt from TSC has been in service for over 10 years now with no problems. Share this post Link to post Share on other sites
mdn1081 1 #9 Posted February 6, 2012 Here is one on ebay for close to 30 bucks. Thats about the price I paid for the one I bought for my 416-8 (kohler not onan). I believe the 7473 fits all K and magnums with an 8 speed. http://www.ebay.com/itm/Toro-Wheel-Horse-Transmission-Drive-Belt-7473-OEM-Part-/380356627170?pt=LH_DefaultDomain_0&hash=item588f058ae2 Share this post Link to post Share on other sites
dadstractor1 5 #10 Posted February 8, 2012 do not know if have that number just got alot new wheel horse belts going too ask 20.00 each dadstractor :laughing-rofl: Share this post Link to post Share on other sites
zeke37 24 #11 Posted June 14, 2017 Hello- I just ordered this belt and there is no way it fits although I checked it with toro. Am I ordering the wrong belt? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,495 #12 Posted June 14, 2017 30 minutes ago, zeke37 said: Hello- I just ordered this belt and there is no way it fits although I checked it with toro. Am I ordering the wrong belt? Too short? The twin cylinder models use a longer belt. This parts list you can download also covers the hydro models so select the correct one. 1991 uses an Onan engine and the belt numbers and sizes are on the first page that opens. Garry Share this post Link to post Share on other sites
zeke37 24 #13 Posted June 15, 2017 Way too short., My model number is 1-0481 and from toro the belt is 7473 but is about half as long as it should be. any info would be appreciated. Share this post Link to post Share on other sites
nylyon-(Admin) 7,120 #14 Posted June 15, 2017 A 1-0481 is a C-160, Automatic the belt for that is #7478 not 7473 (which is popular with 8-speeds) \ https://www.rcpw.com/lookup/#%2fToro_Consumer%2f1-0481%2c_C-160_Automatic_Tractor%2c_1975%2f14.000_DRIVE_BELTS_AND_PULLEYS_(FIG._14A)%2f1-0481-562-1975%2f803984-39840023-00014 You should really start your own thread. This one is old and not for your machine. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,495 #15 Posted June 15, 2017 Garry Share this post Link to post Share on other sites
