Jump to content
Lars

Home made snowplow frame and plowblade

Recommended Posts

Hi Guys

Me and my brother has just started and create frame to a snow plow as it is impossible to get one like that here in Norway

so I post some pictures here ..

IMAG0239.jpg

IMAG0228.jpg

IMAG0230.jpg

IMAG0231.jpg

IMAG0233.jpg

IMAG0235.jpg

IMAG0236.jpg

IMAG0237.jpg

IMAG0240.jpg

IMAG0241.jpg

IMAG0243.jpg

IMAG0245.jpg

IMAG0246.jpg

More pictures etc. coming soon .. :thumbs2:

  • Like 3

Share this post


Link to post
Share on other sites

I'm moving this out of the gallery so members (other than mods) can comment on it. Excellent work, looking forward to more.

  • Like 1

Share this post


Link to post
Share on other sites

Looks good so far I had made a new blade for one a few years back. I'll give you a hint the radius of the plow is 15" IIRC. We have a Hossfeild bender at the shop, I was able to bend angle iron to the radius and just started clamping and tack welding the sheet metal as I went along. It actually worked out very well.

  • Like 1

Share this post


Link to post
Share on other sites

Nice fabrication. That's going to look great when it's finished, If you need any more measurements, just let me know, Id be happy to get the tape measure out and pop out to the garage.

Keep the pictures coming!

  • Like 2

Share this post


Link to post
Share on other sites

Most impressive :thumbs2: . It is also cheaper to have one made here in UK, rather than pay the money they sell for when they rarely come up for sale.

I only wish I had the equipment and facilities to do what yoiu are doing. :banghead:

  • Like 1

Share this post


Link to post
Share on other sites

Thanks for the comment's guys.. :banghead:

it's funny to create it hope it will work too :thumbs2:

some uppdates on the parts..

IMAG0248.jpg

IMAG0250.jpg

IMAG0252.jpg

IMAG0253.jpg

IMAG0251.jpg

  • Like 3

Share this post


Link to post
Share on other sites

some uppdate pict

IMAG0254.jpg

IMAG0255.jpg

IMAG0256.jpg

IMAG0257.jpg

IMAG0258.jpg

have made ​​the turn and release the blade in the shaft ..

Alomst ready for painting :thumbs2:

now i have startet welding on the plow

  • Like 1

Share this post


Link to post
Share on other sites

:thumbs2: ooh .. I know the frame and garage ... oh yes it was with my brother as I am with and make it together .. I'm excited to finish it so it can snow comes soon so we'll try it:)

Share this post


Link to post
Share on other sites

Hello..

a new uppdate.

IMAG0259.jpg

IMAG0260.jpg

IMAG0262.jpg

IMAG0263.jpg

IMAG0271.jpg

now im almost ready for painting..

just need to make some small canges on the releascabel to the turn system.. :thumbs2:

  • Like 1

Share this post


Link to post
Share on other sites

How do you release the lock pin?

Nice Project! :thumbs2:

  • Like 1

Share this post


Link to post
Share on other sites

How do you release the lock pin?

Nice Project! :thumbs2:

thanks Rooster..

I have used a bike cable to the trigger, and handle of bike ..

It works really really well

Share this post


Link to post
Share on other sites

some uppdate pict.

Have rust treated frame and plow blade

next step is painting.. but can not and decide for the color .. red, black, silver, etc..

difficult to find red to match the tractor ..

IMAG0273.jpg

IMAG0274.jpg

IMAG0275.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Now that is a really nice job. Plan well thought through and executed! :thumbs2:

  • Like 1

Share this post


Link to post
Share on other sites

Now that is a really nice job. Plan well thought through and executed! :thumbs2:

Thanks.. :banghead:

yes I have my hours of thinking .. on how to fix things, etc.. frame and it was good I think .. but are not completely satisfied with snowplow .. think I'll make one that is slightly more curved .. 'll see how it works first ...

Share this post


Link to post
Share on other sites

had to have the wheel weights also ... weight on these is 25 kg/55lbs

IMAG0277.jpg

IMAG0276.jpg

  • Like 1

Share this post


Link to post
Share on other sites

You guys from Norway have mad skills :banghead: Excellent job :thumbs2:

Chaz :banghead:

  • Like 1

Share this post


Link to post
Share on other sites

Here are som uppdates pict..

Thanks for all the nice comments .. and help

It has been great fun and a lot of thinking to get it. But finally I'm done with it. Only a few minor adjustments and I'm done

changed the oil on the engine and axle. and given it a service. now it's ready for the winter.

IMAG0281.jpg

IMAG0282.jpg

IMAG0283.jpg

IMAG0284.jpg

IMAG0285.jpg

IMAG0286.jpg

so now im only waiting on the snow :thumbs2:

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Recently Browsing   0 members

    No registered users viewing this page.

×