Jump to content
Sign in to follow this  
ron2681

no crank

Recommended Posts

ron2681

hey fellas, check it- ive got juice down to the starter. when i hold my meter on the eyelet of the solenoid to starter cable (on the starter side) its got 12v. but when i put my meter on the actual stud on the starter itself, nothin. and the cable is tight on the stud! what gives?

Share this post


Link to post
Share on other sites
 
bell

Sound like a dirty connection to me....

Share this post


Link to post
Share on other sites
 
rmaynard

or a bad crimp in the end of the cable. Had the same problem on one of mine. I re-crimped the lugs on the ends of the cable and problem solved.

Share this post


Link to post
Share on other sites
 
ron2681

sounds good, that will be my next step. thanks guys!

Share this post


Link to post
Share on other sites
 
ron2681

ITS ALIVE!!!! thanks for all your help dudes, it was a bad connection. im always overlookin the easy stuff!

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...