How to install a 48" plow on your tractor, this assumes that the mower deck and mule drive are already removed.   FIRST lay the plow on the ground in front of the tractor with the angle handle detached.     SECOND roll the tractor over the plow until the engagement rod is just below the rear axle hitch. Be sure that while moving you move the angle handle out from under the tractor. Lift the rear of the plow into the hitch and lock it in.       THIRD lower the lift handle and install the lift rod into the lift bar. Reattach the angle handle using some grease on the piviot points.   That's all there is. I love how easy attachments are with these Horses...