johnsr11 0 #1 Posted July 5, 2011 I have owned my workhorse gt-1848 for about a year now and just acquired an actual wheel horse plow for it. I needed to make a small plate for the back of the plow frame to mount to, but other than that she fits up perfectly! Just wanted to share some pics! I made the bracket myself, it was my first time ever using a welder, so I was happy with myself! This is the end of my snowplow frame Uploaded with ImageShack.us This is the snowplow that I acquired! Uploaded with ImageShack.us This is the bracket that I made! Another view of the bracket By rogerj07 at 2011-07-04 This is just a pic of my baby By rogerj07 at 2011-07-04 Share this post Link to post Share on other sites
Coadster32 793 #2 Posted July 6, 2011 Looks like it should work just fine. Good job. :woohoo: Share this post Link to post Share on other sites
kadetklapp 1 #3 Posted July 27, 2011 Looks like I'll be in the same boat. I was hoping I could just find a plow to mount onto, but I don't have the bracket on the back either. I just assumed everything was there underneath to hook up to... Share this post Link to post Share on other sites
