scv85 1 #1 Posted June 25, 2011 So I am just finishing up my loader setup for my GT14 and I had a question about the hydraulics. I first had a 3/8" line running to the pump with a 1/2" line from the pump to the joystick. The system worked well and would not bogg the tractor. A wise friend noticed the sizes of line and advised me to change the feed line to 1/2" as well. So now I have 1/2" to the pump, 1/2" to the joystick from the pump and 3/8" as a return from the joystick. The loader now seems to bogg a bit when operating the loader, but other than that works fine. My question is, are these lines correct sizes and is it normal for it to bogg down a bit when operating the controls? Share this post Link to post Share on other sites