Jump to content
Sign in to follow this  
HorseFixer

Removing A Flywheel Off Of An Ole RJ 55-57

Recommended Posts

HorseFixer

If you ever have ran into removing a flywheel off of an Ole' Kohler engine like is on an RJ 55-57 that dont have the bolt holes tapped into the flywheel on each side of the crankshaft you could invent a few new words that are not listed in your dictionary! :whistle:

Take an impact socket and place it between the flywheel cooling fins on the outside edge of the flywheel. Give it a good Rap with a deadblow hammer on several spots on the outside edge of the flywheel. The take a prybar and apply behind the flywheel forcing outward. Make sure your flywheel nut on the crank is in place to ensure that you wont damage your crankshaft threads. Give the nut a good wrap while applying outward pressure with your prybar on the flywheel and the flywheel should come loose! :WRS:

Duke

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...