bunson70 50 #1 Posted May 20, 2011 Hello everyone. I have a 1967 607 (same as a commando 8). I took the deck apart last winter. Now that is finally warm enough to cut grass in Wisconsin, I have forgotten how the bearings and washer go together on the spindles. Does anyone have a diagram or an exploded picture of the spindle and it's parts, so I can put it back together and start mowing lawns? Thank you for any help! :hide: Share this post Link to post Share on other sites
MikesRJ 552 #2 Posted May 20, 2011 Deck size and a picture of what you have would be helpful, but one these should be close enough. http://www.mywheelhorse.com/graphics/file/...1970_5-7366.pdf http://www.mywheelhorse.com/graphics/file/...4-65_RM-324.pdf Share this post Link to post Share on other sites
bunson70 50 #3 Posted May 21, 2011 Hi Mike. The second link that you posted had the diagram that I needed. I just need to put things together sooner. Then I won't have this problem. I don't have a computer at home, so I don't get on here very often. I want to thank you VERY much for the help Mike!! Jeff Share this post Link to post Share on other sites