Duff 206 #26 Posted August 9, 2008 Hey, Dale! For those of us too far away to do the buying thing from you, howsabout a few measurements? Thanks! Duff B) Share this post Link to post Share on other sites
Stigian 1,234 #27 Posted August 9, 2008 Wow, that's a cool bench idea, must save a lot of back ache from bending down to work on WH's Though id need a lot smoother and leveler floor in my workshack for the castors to roll. Share this post Link to post Share on other sites
plowmaster 0 #28 Posted August 9, 2008 thanks for the pictures, think i might build one for each tractor! Share this post Link to post Share on other sites
Curmudgeon 28 #29 Posted August 9, 2008 Hey, Dale! For those of us too far away to do the buying thing from you, howsabout a few measurements? Share this post Link to post Share on other sites
oldandred 15 #30 Posted August 10, 2008 Dale you finnaly did some thing right thats a good looking tractor stan or work bench are the three boards nailed down ?? or just laying there Share this post Link to post Share on other sites
Duff 206 #31 Posted August 10, 2008 Thanks, Dale! I've got some spare timbers kicking around my workshop; next project: tractor bench! Duff B) Share this post Link to post Share on other sites
Z-man 0 #32 Posted August 10, 2008 There's one on Ebay now for sale in MI. http://cgi.ebay.com/TORO-WHEEL-HORSE-MOWER...1QQcmdZViewItem Share this post Link to post Share on other sites
Curmudgeon 28 #33 Posted August 10, 2008 The three center planks were added later, and they just lay there. They are also slightly longer, this way they can be slid beyond the end for work on things that extend beyond the stand. Like the mower in the above picture. A short plank sideways and some big c-clamps keeps them from flipping. Share this post Link to post Share on other sites