Jump to content
Sign in to follow this  
catman81056

Electro 12 hyd. hose's

Recommended Posts

catman81056

Well I scabbed up some temp mounts for the 16hp I have and put it on the Electro. My main purpose was to see if the hydro unit worked. It moves forward and backwards. I noticed the a few of the hoses on the mid lift valve were leaking. It looks like the fittings are supposed to swivel but these swivel to much. I've read before about Wheel horse using some oddball hydro fittings and was wondering if that applies to this. The fitting going into the valve has an Oring, looks like 3/8's. I don't have anything to compare to so I thought I would ask here. Thanks for any help.

Share this post


Link to post
Share on other sites
 
kpinnc

Tim, I'm using standard JIC hoses with adapters for the o-ring ends. They are fairly common, but double check the lengths of the adapters. Some of them (especially the 90 degree) are too long for use around the pump. They stick up so far they hit the toolbox and fenders.

And yes, I think 3/8 is correct.

Kevin

Share this post


Link to post
Share on other sites
 
catman81056

Thanks Kevin, I knew somone on this site would know the answer :thumbs:

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...