weights front and rear

[jrfan882008 2]

[Kelly 1,028]

Hard to see the pic's post them the next size bigger or two bigger I use the mesage board settings but anyway nice weights

[Curmudgeon 28]

Sweet looking weights!!!!!!!!!!!!!!!!!!!!

[Dave 0]

I can't afford weights like that but would the front end of a C81 hold up a really heavy bumper? I have some angle iron and an old 4 inch box beam I could weld together.

[jrfan882008 2]

weights dont cost alot takes more time heatin lead for the pour used a old rim as a mold

[KyBlue 652]

Those are pretty nice. Way to Go!

[jrfan882008 2]

thanks they weigh 56lbs. back each and front are 22lbs. each cant buy weight like this lol

[Sparky-(Admin) 19,455]

I can't afford weights like that but would the front end of a C81 hold up a really heavy bumper? I have some angle iron and an old 4 inch box beam I could weld together.

I think the front end will take the weighted bumper but it might steer hard at slow speeds( like we go fast right ). Front wheel weights would not affect steering and you would get the same results.

Mike..............

[wse100 0]

jrfan882008,

Did you pour the lead then drill where the lugs went, or did you build in holes?

Also what prep did you do to the old rim to make it a "mold".

[Dave 0]

I think the front end will take the weighted bumper but it might steer hard at slow speeds( like we go fast right ). Front wheel weights would not affect steering and you would get the same results.

Mike..............

That's my problem, no steering at low speeds or starting off. Sometimes the frond end comes up.

If they're just lead, I can melt some and pour it into a mold of some kind.

[jrfan882008 2]

took a peice of metel put it in bottom of rim only holes in weight is the two carrage bolts holdin them in place