Electro12WH 50 #1 Posted September 5, 2010 Currently, I am selling on eBay, the custom made spindles that were on a Wheel Horse pulling tractor. They seem to be popular, so I am showing how these are made. Using 1 1/2" x 1/4" flat stock, Part A was created from 3 pieces. If you are adept at metal work, I believe a one piece "C" shape would be better. After drilling the holes, Part B is welded to Part A. Note that the two spindles are mirror opposites. The large 3/4" bolt needs to be long enough to fit the wheels you are using. After it is inserted in the spindle the head is welded in place A Nylock nut is used to secure the wheel. The spindle pivots on a 1/2" Fine bolt secured with a 8 grade lock nut. The original spindles lowered the axle approx. 4 inches. Attached Thumbnails Share this post Link to post Share on other sites
Electro12WH 50 #2 Posted September 5, 2010 I'm sorry, my pics didn't copy and paste. If anyone wants diagrams of this projuct, I can email. Share this post Link to post Share on other sites
Gene_S 93 #3 Posted September 5, 2010 I saw them on ebay and they look really good! Can you please e-mail the diagrams thanks haasman35@yahoo.com Share this post Link to post Share on other sites
jdpuller 2 #4 Posted February 15, 2011 I have been thinking about this for a while could you email the plans to me? Thanks :thumbs: Share this post Link to post Share on other sites
joel_400 59 #5 Posted February 19, 2011 Would you please email the plans to me @ joel_400@yahoo.com Thanks alot! JOel Share this post Link to post Share on other sites
dakman 0 #6 Posted February 28, 2011 i would also like the plans to build these. could you send them to gotjuice@msn.com. thank you Share this post Link to post Share on other sites
n1defan 47 #7 Posted February 28, 2011 Please send me a copy also. Thanks Tom n1defan@yahoo.com Share this post Link to post Share on other sites
Electro12WH 50 #8 Posted March 30, 2011 My apologies to all who have requested my plans! I've been away from internet service for several month on vacation. I am sending a copy of my plans to a member who will post them for me. I don't have a photobucket account. I have Irfanview and apparently that doesn't work here. Share this post Link to post Share on other sites
Bama Jama 0 #9 Posted March 31, 2011 If it's not much trouble I would like a copy also. Bill mdshep@knology.net Thanks Share this post Link to post Share on other sites
n1defan 47 #10 Posted April 17, 2011 Here are Electro12WH's axle plans. Sorry for the wait. Share this post Link to post Share on other sites
Bama Jama 0 #11 Posted April 18, 2011 Thanks guys! No problem on the wait. Share this post Link to post Share on other sites
