OUR FIRST STOCKER

[jdpuller 2]

Our first stock puller started out as a bronco 14 with a 16hp Kohler my girls and i completely stripped it down and sand blased it then repainted it built a custom pulling hitch and front weight bracket. She took it out for the first time on saturday needs a little more work I think the rear end is geared to high but shes having fun.

unloaded and a little nervous

scaled and ready to go

here we go

just a little more

now it dads turn to make some noise

I will add some pictures of the build tonight if i get time.

thanks to everyone on Red Square for you help during this project.

ok thats better

[Stress Test Pullin 0]

to lower your speed some and gain some power back, put a smaller size belt pulley on the engine. this lowers your speed in all gears, i do the same thing with our pullers, using 4", 4.5", and 5" pulleys, but thats on dirt and clay

but sharp looking horse, great job! :thumbs:

[rickv1957 70]

Tractors look great!,Rick

[Roger from southern Iowa 1]

Beautiful tractor!

Good to see the young lady "doin' her thing.

Yours is a looker too. :thumbs:

[jdpuller 2]

I have a friend who runs a 1057 and he changes his crank pulley from time to time but he is running a gear shift trans and I have a hydro.

I know the hydro probably wasn't the best choice but I thought it would be easier for my girls to learn to drive.

If I change the crank pulley will the hydro still work properly/ or will it give the gear reduction we are looking for?

We have another pull this afternoon and I am going to put the stock tires back on(23") because she had the biggest tires (26")of anyone and they are soft so they take power. :thumbs:

[jdpuller 2]

well it ran better with the small tires but I think we still need more motor.

I dont think the governor is set right I'm going to try to adjust it tomorrow.

[jdpuller 2]

Here are a few pictures from the build I got most of the parts back from the sand blaster on memorial day and we pulled it on the 19th of june.Ii thought it turned out pretty nice for such a short time frame.

[chris11 184]

hows that hydo pull?

[jdpuller 2]

I got a little more out of the governor yesterday and we finaly broke the tires loose. we have a couple weeks untill our next pull so it is home work time.

[Crazywheelhorseman 67]

One thing most people forget is when we go for larger diameter tires to get that larger footprint we lose torque. but as we go with smaller diameter wheels we gain torque.

[jdpuller 2]

:thumbs: It took a little bit of tuning but the girl got here first win last weekend. Now i think she might be hooked.

now we can finnsh all the little details and make it look good to.

[jdpuller 2]

We reworked our bronco this winter.

I installed a 8 speed 8 pinion rear end so we could put our big tires on again.

My girls wanted decal with flames on it for in the hood so I made a custom wheel horse logo.

after all that work we still seamed to be a little down on power so I installed a 30 mm carb that I drilled for E-85 WOW do we have power now.

here is a video of Tara taking first place last night.

[chris11 184]

That looks great, glad your doing good with it. :woohoo:

[earlleecliffton 37]

:woohoo: nice

[can whlvr 991]

looks rael nice,good to see your girls into a horse sport too