Jump to content
Sign in to follow this  
C-Series14

1979 C-161 8-Speed

Recommended Posts

C-Series14

I know I am not as experienced as some but just wanted to brag on myself a little and prove again, these tractors are fun and easy to work on! I had the shifter retaining bolt break off in my 1979 C-161 8-Speed's tranny. Couldn't get it out as it sat so decided to pull the tranny. At around 7pm, I started with the fender off, set the tractor's rear footrest support on jackstands, and disconnected the needed items, pulled the fender support, removed the tranny bolts, and backed the rearend away from the tractor. Removed the broken bolt, installed a new one...after I replaced the shifter with a spare because the roll pin was broke in the original, then reinstalled everything and drove the tractor 53 minutes later.

Share this post


Link to post
Share on other sites
 
rickv1957

Mike,Yes they are easy to work on,you made that repair in very good time,you know your horses! :D Rick

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...