Jump to content
Sign in to follow this  
CHARGER9AUTO

Wheel Horse Generator

Recommended Posts

CHARGER9AUTO

I should have the Delco - Remy Generator on my '63 953 but it does say the only tractor that has one is the 1045 . Ben

Share this post


Link to post
Share on other sites
 
TT

What's on yours now, Ben? It should have an oval tag riveted to the generator case. That will tell you the model number.

It's the same S/G as the 1045, 1055, 1056, etc.

Share this post


Link to post
Share on other sites
 
CHARGER9AUTO

What's on yours now, Ben? It should have an oval tag riveted to the generator case. That will tell you the model number.

It's the same S/G as the 1045, 1055, 1056, etc.

Terry , The Generator's oval ID plate not on the Case anymore no where to be found I have the motor serial # and spec plate off the blower housing . Ben

Share this post


Link to post
Share on other sites
 
TT

Do you need the Delco - Remy numbers, Ben?

I can get them off my 1056 if you just want to know what it is or need to order parts.

The Kohler P/N is B-275703, but -- as you probably already know -- it's no longer available.

Share this post


Link to post
Share on other sites
 
CHARGER9AUTO

Do you need the Delco - Remy numbers, Ben?

I can get them off my 1056 if you just want to know what it is or need to order parts.

The Kohler P/N is B-275703, but -- as you probably already know -- it's no longer available.

Terry in PA, The Wheel Horse Generator on my 953 has two oil filler holes one on each side . Ben

Share this post


Link to post
Share on other sites
 
TT

I have two of them, (that I can find) Ben.

One is off of a 701 -- Model # 1101933 / Serial # 1A10

The other is off of a 753 -- Model #1101933 / Serial # 2016

They both have 6" cases and bearing oilers on both ends.

My 1056 has a 7" case and the model # is 1101973 / serial # 6A 3. It does not have the oilers.

Share this post


Link to post
Share on other sites
 
CHARGER9AUTO

I have two of them, (that I can find) Ben.

One is off of a 701 -- Model # 1101933 / Serial # 1A10

The other is off of a 753 -- Model #1101933 / Serial # 2016

They both have 6" cases and bearing oilers on both ends.

My 1056 has a 7" case and the model # is 1101973 / serial # 6A 3. It does not have the oilers.

Terry, I looked at ID plate on the Generator's Case it's a DELCO - REMY . Ben

Share this post


Link to post
Share on other sites
 
CHARGER9AUTO

I have two of them, (that I can find) Ben.

One is off of a 701 -- Model # 1101933 / Serial # 1A10

The other is off of a 753 -- Model #1101933 / Serial # 2016

They both have 6" cases and bearing oilers on both ends.

My 1056 has a 7" case and the model # is 1101973 / serial # 6A 3. It does not have the oilers.

Terry , The voltage regulator is wrong but it works it's not DELCO - REMY an off brand regulator . Ben

Share this post


Link to post
Share on other sites
 
TT

Terry, I looked at ID plate on the Generator's Case it's a DELCO - REMY . Ben

Were you just trying to find out who made it, (they're all Delco - Remy) or do you need to work on it too?

Older automobile starter/alternator repair shops can get parts and/or repair these units.

Share this post


Link to post
Share on other sites
 
CHARGER9AUTO

Were you just trying to find out who made it, (they're all Delco - Remy) or do you need to work on it too?

Older automobile starter/alternator repair shops can get parts and/or repair these units.

Terry, I found the Delco - Remy ID plate while wiring up the tractor no need to work on the Generator it works fine my 1045 has the same Generator except with no oil filler holes . Ben

Share this post


Link to post
Share on other sites
 
TT

Does the 953 S/G have a 6" long case? (just curious if it's a smaller one. :thumbs: )

The 1045 should be the same as my 1056 -- according to Kohler.

Share this post


Link to post
Share on other sites
 
CHARGER9AUTO

Does the 953 S/G have a 6" long case? (just curious if it's a smaller one. :thumbs: )

The 1045 should be the same as my 1056 -- according to Kohler.

I do not know if my 953 has the 6" Generator Case . Ben

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...