junkman 0 #1 Posted December 8, 2009 BIGG backfire no run thats all i can get. i had it apart for crankshaft swap, but lined everything up i think........what about the gas-kerosine timing?????? im talking about a "320000" :banghead: Share this post Link to post Share on other sites
chris11 184 #2 Posted December 8, 2009 if it back fire bad you may have sheared the key way Share this post Link to post Share on other sites
junkman 0 #3 Posted December 8, 2009 thats the thing i had it all the way down to the block except valves. new key new condencer, it sounds like a 10 guage!! Share this post Link to post Share on other sites
Dale 0 #4 Posted December 8, 2009 i have a 15hp on a unico never had it apart i can tell you it's i good engine have you checked the points? once i has the condenser on the wrong side of the coil on a kohler took me 3 day to figure it out Share this post Link to post Share on other sites
Jim_M 178 #5 Posted December 8, 2009 what about the gas-kerosine timing?????? Huh? Can you explain that one to me? Share this post Link to post Share on other sites
junkman 0 #6 Posted December 8, 2009 3 slots on the bracket that holds the armature to the block. :notworthy: Share this post Link to post Share on other sites
junkman 0 #7 Posted December 15, 2009 any other ideas?????? :notworthy: Share this post Link to post Share on other sites