bearfoot 0 #1 Posted November 7, 2009 how do you get the electric clutch off motor . There is a center bolt is that all just pull it off I dont know. It is on a Raider12. and can you repair them thanks Share this post Link to post Share on other sites
cgp_tlspradlin 0 #2 Posted November 21, 2009 Bearfoot, You need a 5/8"-11NC bolt that is about 6" long. It will thread in where you removed the other bolt. as you tighten the 5/8" bolt, it will push the clutch off the crankshaft. The only real problem is keeping the crankshaft from spinning while you're doing this. Some of the clutches can be taken apart, but not all. A lot of them allow you to replace the coil. You can still buy them new from Warner but at about $300, a used one is preferable and are sold on Ebay pretty often. Hope this helps! V/R Tommy in Virginia Share this post Link to post Share on other sites
Duff 206 #3 Posted November 22, 2009 Aah! Another voice heard from! Tommy, ! Duff :notworthy: Share this post Link to post Share on other sites
bearfoot 0 #4 Posted November 22, 2009 Aah! Another voice heard from! Tommy, ! Duff thanks I got it off looking for clutch :thumbs: Share this post Link to post Share on other sites
