Search the Community
Showing results for tags 'size'.
Found 4 results
Cannot find info on proper drive belt size for my 48" mowing deck. I have what I believe is a 1990 416-H (41-160E01) with a 48" deck (xx-48SC02). All parts guidance on the various web pages recommend a 1/2"x103" belt for both 42" and 48" decks. However, this size is too long when I tried to replace. So rather than go trial and error with buying several belts and seeing what gets me lucky, I thought I'd first post a note here. Thanks for any constructive assistance.
Hi all, Just a little bit of information regarding replacement drive belts for the 227-5 in the UK if you are not buying OEM that might help someone in the future. The part number listed is 108427, which specs out as: Top width: 13mm Depth: 8mm Outside Length: 2235mm = 87.99" Sadly, a number of the first sites I found didn't specify that the 88" is the outside measurement so I having trusted their information and with the old belt still installed I just ordered A88s. Anyway, as I'm sure you all know, belts are sold based on the internal measurement therefore you would require A86! Actually now having spent some more time digging for information about the belt I have found sites specifying 88 as the outer diameter. including http://outdoorpowerinfo.com/, which seems like a pretty handy website. Regards Chris
Hello, my employer has what I have believe to be a 1990 model year, 520H with 60" mower (earlier style with skids on front corners) that has been sitting in a building, unused, for approximately 7 years. Other than being dusty, it appears to be in good condition. I believe it has about 700 hours on the meter. As far as I know, nothing is wrong with it, but we will be conducting a thorough examination, and if OK, a complete cleaning and service of the unit to get it back into shape. If there is a problem (Onan valve issue, etc.), we will probably sell it. Anyhow, if possible, could someone with a 60" mower provide for me a measurement of total width of the deck, with and without the chute/deflector? I'd measure this myself, but the unit is an hour away from me. I am interested in knowing if this would fit in a 6x12 enclosed trailer for transport. Thank you! Update: After I posted this, I found the answer to my question - about 65". Sorry about that! Anything I should check/look out for otherwise on a 520H that has been sitting?
Hi I was just wondering if a 10 and a 12 hp head are the same in size and bolt pattern. A friend gave me an screw in timing gauge that fits in the spark plug hole to time an engine at T/D/C. so I have an Idea about drilling a hole and tap it to 14mm in an scrap head. any info would be helpful. Gary B............