Search the Community
Showing results for tags '417'.
Found 3 results
Acquired locally a 417A with a bunch (3000+) hrs on the meter, but a jump got it running and for $200 I drove it home. Came with a blade too. Thought the price was right considering it had a 48" deck mounted that looks to be in much better shape than the rest of the tractor. As I said I did drive it the few blocks home with an occasional pop or crack from the motor that I attributed to possibly a sticking valve or even just some old gas. Parked it and tossed a tarp half over it until I could get a chance to work on it, which turned out to be longer than expected. Anyway, to the problem, I went out a couple of days ago and put a charger on it for a while and tried to start it and it turned over about a quarter turn and locked up, so I pulled the spark plugs and tried the starter again and the worst looking junk I had ever seen in a motor came squirting out of the plug holes. Whats up with that? How would a motor fill up with GUNK, even setting outside? Shot a bunch of PB Blaster in both plug holes to try to loosen up any rust or junk in the cylinders but would like to figure out where it got into the cylinders, in the first place, before I go any further with trying to save it. Motor appears to have all the tin, air cleaner and muffler on it.
My Dad passed away and we have sold the house. The Wheel Horses were his pride and joy. $1,600: 417-8 with the 3hp Briggs & Stratton Leaf Vacuum. $1,600: GT-2500 Anniversary Special with Snow Plow, Weights and Chains. $2,900: Both Tractors with all Accessories