Jump to content

repairman

Members
  • Content count

    127
  • Joined

  • Last visited

Community Reputation

7 Neutral

About repairman

  • Rank
    HORSEPOWER
  • Birthday 03/01/1977

Wheel Horse Information

  • tractors
    314/8 1054 B100 RAIDER12 FULL LINE OF IMPLEMENTS

    NOTHING RUNS LIKE A DEERE BEING CHASED BY A HORSE.
  • favoritemodel
    1054

Profile Information

  • Location
    Spencer IN
  • Occupation
    TECHNICIAN
  • Interests
    tractors/guns/
  1. WH Tiller #77-36TL01 Question?

    That is what I needed thanks to all for the help.
  2. WH Tiller #77-36TL01 Question?

    looks like small pulley 2.5" and on the large 4.25" O.D can somebody confirm this?
  3. need to know what size the mid mount idler pulleys are they are item #89 & #92 and what is the proper belt length? thanks for the info.
  4. 520 h wiring Question?

    Does the yellow wire go to the negative side of the coil or positive?
  5. 15" jeep wheels turned inside out
  6. 14 HP M 6 speed gear box 15" Jeep Wheels 42" snowblower its been alot of work thanks for looking.
  7. wheelhorse 12" wheel bolt pattern?

    thanks for the info........Merry Christmas
  8. what if any automotive bolt pattern is the same as the wheel horse 5 lug pattern?
  9. 1054 hydro pump question

    weight & type for the pump?
  10. DOES ANYONE HAVE A ORIGINAL PART # FOR THIS PULLEY ? TORO DOES NOT LIST TRACTOR PARTS ONLY TRANS AND HYDRO PUMP PARTS NO PULLEYS FOR THE 1054 MAYBE SOMEONE HAS ON OWNERS/PART LIST FOR A 1054 THAT WAY WE COULD SEE IF THERE IS A SUB-PART LISTING THREW STENS.
  11. here is some pics of what I am working with. hard telling how many engines has been on this horse this has a 1/2" belt driving the trans this pulley setup is on another tractor but something like this might work if it were close to the right diameter so that ratio would not change.
  12. does anyone know where I might start looking for a single hydro pump pulley? I tried Tractor supply and Rule King it is hard to find anything 1 1/8 to start with and then something that small. in theory do you guys think that if I could find a close match to this pulley that I could get this to work? I want to use a 14 hp M engine that is on another tractor I have drive pulley's of different sizes with the outer mule drive or PTO pulley complete. another thought is it possible to run the hydro of the drive belt? just by running it over the top of the hydro pulley and then down to trans would it turn the pump correctly and also allow for clutch ? just a thought anyway thanks for all the support I really appreciate your knowledge and pics by the way that's a nice looking 1054 in those pics. :D
  13. The small hydro pulley, is it a separate pulley from the trans pulley and what is the exact measurements of it so I can try to find a sub-part that may work. will also need to know thickness of this pulley. thanks for the help and the pics. :woohoo:
  14. OK then the mule drive inner pulley must be unique double pulley? this might be really hard to find wished I had a picture of the pulley setup. thanks for the info.
×