Jump to content

saminmn

Members
  • Content count

    18
  • Joined

  • Last visited

Community Reputation

7 Neutral

About saminmn

  • Rank
    Member
  • Birthday 03/11/1941

Wheel Horse Information

  • favoritemodel
    all tractors

Profile Information

  • Location
    Crookston, Mn 56716
  • Occupation
    Retired
  • Interests
    Working in my shop.

Recent Profile Visitors

797 profile views
  1. 341 kohler acr

    Shynon. I only removed the rod and piston and deglazed the clyinder wall,so timing marks should be ok right? On my way to buy some parts to make a leakdown tester.
  2. 341 kohler acr

    OK here is the deal. 16hp 20 over kohler. It was smoking and burning oil (so on the cheap ) I put in 20 over rings and honed the cly wall.Back together it would not fire .static timed it and cleaned the carb no fire ,checked the comp 10-12 psi . Ill make a leak down tester ,well see what happens. Thanks for all help , Ill keep you posted.
  3. 341 kohler acr

    Will a 341 kohler with acr show any compression? mine shows about 10-12 psi. I failed to say its not running. only by starter
  4. carb question

    thanks for the info.
  5. carb question

    I have a carb # A237772 (C5) painted blue/green #26 stamped inside .What is this used on? What brand is it? Was on a kholer way back when,maybe 12 hp?
  6. choke plate screws

    Thanks for the info ,found the size, 3-48
  7. choke plate screws

    what is the screw size for a carb choke plate on a kholer eng.
  8. B&S SER .# HELP

    I BOUGHT A USED B&S MOTOR LAST WEEK AND CAN'T FIGURE OUT THE SERIAL. # . IT READS LIKE THIS .23 203010 76597 008 018 WHAT IS THE HP ?
  9. Have a gt 14 with a 48" deck & don't know how to raise & level the front it. Any help please!
  10. Kohler carbs

    Will a k341 carb work on a k301
  11. tow valve thanks

    thanks for the replies and help with my tow valve . A little deep creep and luck its now working.
  12. gt14 tow valve

    I have a gt14 we pulled out of the woods this summer but the tow valve will not move .Which way should the lever turn? clock or counter
  13. Ford Eaton 850 trans.

    thanks for info. I do not have the oil anymore but might have the filter.I will cut it and see.
  14. Ford Eaton 850 trans.

    I have a 89 Ford yt16H that the trans seems to be slipping. I have changed the fluid,filter, and put on new belts.They are all tight & everything seems ok .Sometimes its ok when I first start out but gets worse as you go along. Any suggestions?
  15. Model L 155 ?

    Saw this on a tag for a wheel horse ( model L 155 Ser. #105779 ) what is it?
×