Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 02/19/2024 in Classfieds

  1. 8 points
    Well I have to start somewhere, so here I go . All I can tell you about them is they each ran and drove before they were parked in the barn . The transmissions I don’t know the condition.They have been sitting for years and they need to go to new homes before all the tires get ruined . I will be posting more giving RS members first chance. Local pickup only 1055 - $250 very bad repaint and the headlights don’t come with tractor 1075 - $300 my barn find rat . Comes with brand new WH drive belt and nylon slide plate for the transmission . Nice dash and has the cig lighter . 856 - $300 pretty much all there and in original paint. Nice dash with cig lighter . I can have the seat pan rebent and welded if wanted . 1057 - $525 this one I really don’t want to sell but it needs to go . Very nice all original tractor. Mower is whisper quiet with one small hole that can be easily fixed. I’d say probably one of the nicest original tractors out there . Comes with a new cable to raise and lower the slot hitch ( purchased from Lowell )
  2. 8 points
    1977 C-120. Excellent mechanical condition- great candidate for full restoration. I rebuilt the engine 2 years ago- it now has 60 hours on it- machine shop bored and honed cylinder 0.010” over, cut valve seats for new valves, and ground crankshaft 0.010” under- and I rebuilt w/ new oversize rod, piston, new rings, new crankshaft bearings, all new gaskets, etc. Starts right away and runs strong. Hydrostatic trans in good shape. 42” mower deck is a little beat up, but solid. Other new parts: battery (last month), tie rod ends, custom wide rear wheels, new tires all around, receiver hitch.
  3. 7 points
    Complete motor. Missing only flywheel screen. Is proper spec number and comes with all that's photoed. Call or text with any questions.
  4. 6 points
    Shynon

    753

    Wheel Horse 753, has 8hp engine, runs and mows good. Can bring to Pullstart's plow day in April if paid in advance.
  5. 4 points
    Wheel Horse parts collection. Many new-old stock and used parts for many models. Please make an appointment to view. No trades. There's a lot of parts for D-160 and the C series. This is a collection left behind by my Father, so I'm really not sure what part is what here. There's even a D-160 Tractor under a tarp in the backyard with a three point hitch. Hasn't run in a decade. I'll throw that in if you meet my price. Willing to sell entire lot for $1850 obo Mitchellocastiglione2@gmail.com
  6. 4 points
    Wheel Horse Sickle Bar attachment for pickup in Corfu NY
  7. 3 points
    Wheelhorse 312 with mower deck. Wheel weights…. Bagger and cart. Included. Will part out if enough interest in parts. Still has air cleaner cover and is 100% complete tractor is 100% operational.
  8. 3 points
    Here is a good condition 42in Rear discharge deck. Blades were sharpened at the end of last year but could use another sharpening. Anti scalp wheels are still nice and tight. Also comes with front mule drive and belt. No rot throughout the deck and little rust. Nice and quiet bearings and was greased regularly I used it last season and cut very well. The blades still have a lot of mowing left in them. $250 OBO cash and pick up only no shipping and no delivery.
  9. 3 points
    Near mint original black hood plastic seat pan... Somebody out there doing a resto and want "original" First one Ive ever seen with 0 cracks or chips or anything... Andover CT Tony 860-978-9039 $75... amd no I dont want to ship, yes I will bring to big show...
  10. 3 points
    96-42BA01 plow. Brand new in box. I assembled to make sure all parts were included. Did have to add a trip spring, spring rod, and index rod. Someone "borrowed" them as it sat in the warehouse for 50 years. Box is a bit rough, but I could reinforce it for transport. I will disassemble it, need workbench space. Made for (per manual): 1974 A800, 1975 A80 1976-7 A90 A100 I believe vertical shaft tractors. Maybe others? Thanks for looking Matt
  11. 2 points
    Nice running 58 rj, has starter generator for easy no rope starts, new battery. Runs, very nicely , transaxle rebuilt last year all new bearings and seals, no leaks. At 6’4” , #230 +. I’m just a bit to big for it , LOL PICK UP IN EASTHAMPTON MA. All my pics are to big to load, I can text pic’s if you are interested. Or I can email them as well
  12. 2 points
    I stripped two GT-14's and the project didn't go as planned so I'm getting rid of everything. Asking $100.00 for everything. There's quite a bit of parts, well worth the money, I've got more invested, but just want them gone at this point. Thanks for reading.
  13. 2 points
    For sale is a rare Xi series tiller. Good shape, some paint still on tines. All pulleys move freely without noise. Comes with tiller front mule drive only. pm for more pics/ info/ reasonable offers. Pm for more pictures or information.
  14. 1 point
    I believe this is a 1974 c160 but I would be glad to be corrected . The original owner parked it after breaks began going bad and that was where it set for.the next 20 odd years. Feel free to text for questions , serious inquiries only please
  15. 1 point
  16. 1 point
    Very Rare Massey Ferguson Wheel Weights. Part #511864M1 Canada Stamped. 40# per one set. Will not separate and can ship at buyers expense.
  17. 1 point
    Wheel horse tractor covers that come with a carrying bag . These covers are water resistant and for everything up to a 520-H. Can be shipped at buyers expense . $65 ea. / 4 or more is $60 Redsquare supporter pricing. $60 ea. / 4 or more $55 ea. (860) 681-3610
  18. 1 point
    RotoTiller model # 0736TL03 - very good condition - includes tiller spring, and PTO mule idler pulley unit. Believed to fit most 300 - 400 - 500 tractor models as well as other WH tractors - Buyers should confirm match of tiller model # to their WH tractor. Sold as is, no returns - cash pick up near Poughkeepsie, NY. Please send p.m for questions or to arrange pick up.
  19. 1 point
    Looking for a Work Horse/Wheel Horse, one of those gray ones with the Briggs and Scrap iron engines. Any model, any condition. I'm wanting one to add to my collection of 32 Red Wheel Horses. Pm me here, thxxxx, Sincerely, Shine.
  20. 1 point
    Shifter Tunnel, Console Dash Plates - misc assortment of plates available - please open each photo to see item design style and photo number. Some are used, some appear not used - condition varies. Match plate to your tractor - I do not have plate part numbers. Sold as is, no returns. Pick up in Poughkeepsie, NY area - or buyer pays added cost of shipping at flat cost of $10 for single plate plus $5 each additional plate. Please send p.m. if interested or questions? thanks
  21. 1 point
    I have a pair of Wheel Horse wheel weights for sale. Come with mounting hardware. Would like $100 in Dexter, NY Thank you so much! Chuck Mitchell
  22. 1 point
    Belt # 9782 - i believe proper cross reference as # 6737. -- Measures 69" x 1/2 -- Master list shows it as mower deck pto drive belt for older tractor models from 1969 to 1972 - I came in possession of it by accident --- could be new or almost never used??? I will never have a use for it - so rather than throw away thought i'd ask if anyone needs it -- available for 15 dollars plus a guess to me to ship about 15 so total available for $30 - please send p.m. if interested
  23. 1 point
    Raider 14 with Tiller. Machine runs great, strong worker. No longer having a garden and do not need. $750 firm. Text Paul at 765-719-5574. Thank you.
  24. 1 point
    C165 with Tilting dump trailer and mowing deck. I believe the tractor is a 1984. I'm no expert though. It's in great shape. All original and runs great. Always stored inside. Great tractor. Trailer and mowing deck are also just as good. Stored inside as well. Admittedly, I don't know much about these tractors but know this a solid unit and looks great. The spots under the tractor in the pictures is water. I had just cleaned it up. Need to sell if for my company. Thought I would try on a site were it would go to someone who would appreciate it! $850obo needs to go.
  25. 1 point
    Two tractors and accessories for sale. One tractor is a 1983 GT 1642 with a Briggs and Straton engine. The second tractor is a C165 with a Kohler engine. Both have 38" mower decks. These tractors are in very good shape. Have been garage kept. Have not used either one for 3 years, so probably will need batteries or charged. Also have a 4 foot ( 48" ) snow plow in excellent shape and fits both tractors. Also have tire chains which fit both tractors to use with plow or whatever. Also a spike aerator which fits both tractors. Both snow plow and aerator are wheel horse brand. As a bonus, anyone who buys the entire lot, I have a Peco leaf vacuum which fits both tractors. This is an axel mount vac which has an outer canvas bag which takes plastic inner bags to empty and reuse. problem is 5 hp. techumseh motor is blown. Still have motor if someone wants to rebuild. Will add Peco vacuum for free if someone buys the whole lot. Call for more info.
  26. 1 point
    I’m selling my M12 engine. Runs great! local pickup only …. Including a video of it running yesterday (5-11-23) Dave Jenkins 2699677056 IMG_4439.mov
  27. 0 points
    Small Engine Shop in Avon Closing. Liquidating all equipment, tools, manuals, engine rebuilding tools, shop equipment, storage, tool boxes… 40 years of twisting wrenches has left me with a pile of tools. All name brand items, no junk. Want to sell, don’t NEED to sell. Prices are very fair. I’m here full time if you want to stop by and poke around.
This leaderboard is set to New York/GMT-04:00


  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
×
×
  • Create New...