Jump to content
  • Please Read

    The classifieds are for MEMBER equipment only. Please do not post links to ad's or auctions on other hosted on other sites. Any such postings will be deleted. Posting of any comments other than questions regarding the ad will be removed without notice.  Please help us keep the classified section on track.  If you are posting an item for sale you MUST include your location and a price. Items posted without a location or price are subject to removal. You may NOT auction an item to the highest offer. RedSquare is not responsible for the accuracy of the listings. First and foremost, "make all deals at your own risk" and "settle all disputes off of the forum". It is your responsibility to validate the legitimacy of the seller and the sale.  You may report a failed transaction to the moderator administration team which will be evaluated for repeat offenders.  Any effort to deliberately deceive or defraud members will result in expulsion from the forum.

    Do not post duplicate ads in an attempt to increase visibility, any duplicate posted will have newest ad removed, continued posting of duplicate ads will result in suspension.

     

    Hint use the filter on the right to only see active posts. Closed posts indicate the item is no longer available.

     

  • Wheelhorse Pulleys


    greenbushtrees
    • Active
      Price: $10 - $30.00
      Location: Plymouth, Wi
      Contact: summittrees@excel.net

    Large assortment of late model Wheelhorse pulleys.  Prices range from $10 - $30 - 

    Part numbers are on the boxes.  If you need a picture of a certain pulley or price, let me know

    The last two pictures are pulleys that have no numbers.  If it looks like something you need, I can give you dimensions 

     

     

     

     

    P1010003.JPG

    P1010002.JPG

    P1010001.JPG

    P1010004.JPG

    P1010005.JPG

    P1010006.JPG

    P1010009.JPG

    P1010010.JPG

    • Like 3


    User Feedback

    Recommended Comments

    I'm looking for 5" pulleys with 3/4" bore keyed 2 of the single groove and 1 of the double groove for 1/2" v belt. The spindle shaft is 1 1/4" for the single groove pulleys and 1 1/2" for the dual groove pulley.

    Share this comment


    Link to comment
    Share on other sites

    I could not find a 754 tractor in my book.  However, I did find a 753 which has a 3 speed transmission.   The pulley no. comes up as a 1611 which I have a new one.  It is cast iron.  I am looking at  $24.00 which would include shipping.

    Share this comment


    Link to comment
    Share on other sites

    I had posted about pulleys for 48 inch deck.

     

    One of site administrators flagged me thy my post was accidentally deleted.

     

    please PM me. 

     

    I sent a seperate note note to the email address you listed above. Replying to that is probably most expedient method.

    Edited by Aldon

    Share this comment


    Link to comment
    Share on other sites

    I think I have both of these pulleys.  I am out of town til tomorrow nite.  I will check and get back to you then.  My email is summittrees@excel.net   Thanks

    8/24/16

    I do have both the pulley you need - 2 of the 106072 @7.00 each = $14.00

     

    1 of the 106071 @18.00 

    shipping would be $7.00 - Total would be $39.00

    All of these pulleys have never been used.  please reply to me at summittrees@excel.net

    Edited by greenbushtrees
    answering want add

    Share this comment


    Link to comment
    Share on other sites

    I see a box marked 6692. I need one for my mower deck. Do you have a cost for me? Very interested in purchasing one from you.

    Share this comment


    Link to comment
    Share on other sites

    I'm looking for a pulley, part no. 2707   It's the pulley on the drive shaft of a 37" snowthrower.

    Share this comment


    Link to comment
    Share on other sites

    I am searching for a drive pulley to fit an 8 HP kohler 1" shaft. cast iron pulley.

    price as well if you have one

    Thanks

    Bill

    Share this comment


    Link to comment
    Share on other sites

    After further search, I was wrong about what size blower I have, it's a 42" and that one needs a #8158 pulley that turns the drive shaft.  I looked at all your pictures, but that # didn't jump out at me.  So I wonder if you have that one?

    Share this comment


    Link to comment
    Share on other sites

    The #8158 has a new number which is 88-2190.  I did some research and came up with one with these dimensions:  5-1/2" OD: 5/8" belt and 3/4" keyed ID.  If these dimensions match, I do have one.

    20 hours ago, redone said:

    I am searching for a drive pulley to fit an 8 HP kohler 1" shaft. cast iron pulley.

    price as well if you have one

    Thanks

    Bill

     

    20 hours ago, redone said:

    I am searching for a drive pulley to fit an 8 HP kohler 1" shaft. cast iron pulley.

    price as well if you have one

    Thanks

    Bill

    Can you give me more information like a part number, model of tractor or dimensions of the pulley

    Share this comment


    Link to comment
    Share on other sites

    Yes gbt that is the pulley I need for my thrower, 88-2190, as those measurements are the same as what is there now. 

    Share this comment


    Link to comment
    Share on other sites

    Do you by chance have the drive pulley 1609. It's a double pulley -  2.5 inch diameter with 3/4 ID.

     

     

    • Like 1

    Share this comment


    Link to comment
    Share on other sites
    On 3/19/2017 at 11:47 AM, redone said:

    I am searching for a drive pulley to fit an 8 HP kohler 1" shaft. cast iron pulley.

    price as well if you have one

    Thanks

    Bill

     

    On 3/19/2017 at 11:47 AM, redone said:

    I am searching for a drive pulley to fit an 8 HP kohler 1" shaft. cast iron pulley.

    price as well if you have one

    Thanks

    Bill

    Can you give me more information like a part number, model of tractor or dimensions of the pulley

    Share this comment


    Link to comment
    Share on other sites

    I see when posted you had pulley 107439 double center pulley. If you still have this pulley let me know as I currently need one.                                                                                                                                                             Thanks, James

     

    Share this comment


    Link to comment
    Share on other sites

    I don't know if you got my message yesterday.  I do have a 107439 double center pulley.  It has never been used but has a little rust.  I will sell for $20.00 plus shipping.  If interested respond to summittrees@excel.net.   thanks

    Share this comment


    Link to comment
    Share on other sites

    Hi, I need both end pullys 110146 and the middle pully 110147.

    Also do you have the deck spindles? 112674

    Thanks

    Bo Dawg

    Share this comment


    Link to comment
    Share on other sites

    Hi - I do have the pulleys.  I do not have the spindle #112674.

     

    Pulleys #110146 are $15.00 each and the #110147 is $25.00 plus shipping.  

     

    Let me know if interested, I can give me shipping if you give your zip code.   Thanks

    • Like 1

    Share this comment


    Link to comment
    Share on other sites

    I do have a lot of pulleys that do not have part numbers and can't identify.  If you could give me some dimensions, I might have one for you.  I would need -

     

    cast iron or steel

    O.D.

    I.D.

    Thickness

    Belt size

     

    Thanks.   Wayne

    Share this comment


    Link to comment
    Share on other sites

    Wayne, Do you have any Wheel Horse part # 8781? These are listed as a clevis assembly; but, are more like a bow anchor or chain shackle.  I know the part # has been superseded to a different # 2 times and the part is not the same as the original, but I am only looking for the original parts.  Thanks, Mark. 

    Share this comment


    Link to comment
    Share on other sites
    On 3/31/2017 at 11:08 AM, greenbushtrees said:

    Hi - I do have the pulleys.  I do not have the spindle #112674.

     

    Pulleys #110146 are $15.00 each and the #110147 is $25.00 plus shipping.  

     

    Let me know if interested, I can give me shipping if you give your zip code.   Thanks

    Yes. 47341

    Share this comment


    Link to comment
    Share on other sites
    On 3/31/2017 at 11:08 AM, greenbushtrees said:

    Hi - I do have the pulleys.  I do not have the spindle #112674.

     

    Pulleys #110146 are $15.00 each and the #110147 is $25.00 plus shipping.  

     

    Let me know if interested, I can give me shipping if you give your zip code.   Thanks

     

    14 minutes ago, bo dawg said:

    Yes. 47341

     

    Share this comment


    Link to comment
    Share on other sites

    Shipping for all three would be $7.00.  I do take paypal if you want to purchase.  total for the three with shipping would be $62.00.   paypal to summittrees@excel.net.  If needed, I can send an invoice if you giveme your email.  thanks

    Share this comment


    Link to comment
    Share on other sites

    I have a GT 14 Automatic with PTO.  I call it the "odd" sideways pulley the deck belt goes from the PTO and around the deck.  There is a small pulley that the "V" part of the belt rides in. My tractor numbers are 1452 and serial 724896.  Do you have the arm that the sideways pulley attaches to or the small pulley?

    Share this comment


    Link to comment
    Share on other sites
    22 hours ago, BIG GOOF said:

    I accidentally entered wrong model number for my 1970 GT 14 Automatic with PTO.  I call it the "odd" sideways pulley the deck belt goes from the PTO and around the deck.  There is a small pulley that the "V" part of the belt rides in. My tractor numbers are 7452 and serial 724896.  Do you have the arm that the sideways pulley attaches to or the small pulley?  Please reply if anyone had any information or where I can find a manual to buy or to download.

     

    Share this comment


    Link to comment
    Share on other sites

    Looking for a double pulley -  pulley 79-7130 - for the right discharge spindle to attach a wh/toro grass vac. If you could check , I'd appreciate it.

    Share this comment


    Link to comment
    Share on other sites
    12 hours ago, BIG GOOF said:

     

    Don't think you got my message from yesterday.  I need the number of your mower deck.   If you go to Toro Master Parts View.  Enter your deck number and you will be able to get a part # and a diagram.  Please reply to summittrees@excel.net.  Thanks   Wayne

    Share this comment


    Link to comment
    Share on other sites

    I am looking for 2 cast iron pulleys . The numbers will be cast on the pulley . A v groove # 101763 and a flat #101762. They both have removal bearing. Thanks Jim Winder/ El Camino/ wheelhorse

    Share this comment


    Link to comment
    Share on other sites

    I do not have the cast iron pulleys you need.  However, they have been x ref.  the 101763 x ref to 92-7103 and the 101762 x ref to 104975.  These are steel pulleys with bearings.  I do have these and will sell for $20.00 each plus shipping.  these have never been used.  Let me know.   thanks.   Wayne

    Share this comment


    Link to comment
    Share on other sites

    Thanks , I will let you , I found a complete mule with the cast iron pulleys. I do need to check the pulleys (steel ) on  other 2 mules. I also need to check a pulley on a 42 inch rd deck.

    Share this comment


    Link to comment
    Share on other sites

    I'm looking for an idler pulley for the speed control linkage part # 7434

    would you happen to have one of those?

    Share this comment


    Link to comment
    Share on other sites

    I do have the pulley you need.  I have them in red and black.  If interested, I will sell for $15.00 which includes shipping.  This is a new pulley.  Please reply to summittrees@excel.net

    Share this comment


    Link to comment
    Share on other sites

    I'm taking the guard off today and get the exact measurements of the pulley, I had ordered one from another source, but it wasn't the right one.  Or someone has changed to the one that's there now.

    Share this comment


    Link to comment
    Share on other sites


    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now


  • Recently Browsing   0 members

    No registered users viewing this page.

×